K

kingsonlim

New Member

• Sep 3, 2010

• #1

hi guys,

I am unable to shift it out of park on my 300tdi auto disco. It was fine in the morning, but refused to shift out of park when I start her up just now. Anyone know what could be wrong?

I know that the footbrake has to be depressed before I could shift it out of park, so there appears to be a switch somewhere. But where? Is there a way to bypass it?

Cheers!!

 

B

bmp42

Active Member

• Sep 3, 2010

• #2

brake light circuit?

 

smarty1972

New Member

• Sep 3, 2010

• #3

What age is yours? Mine moves out of park without the footbrake.
Have you tried it with the Hi/Lo in the neutral position too or not?

 

discool

Well-Known Member

• Sep 3, 2010

• #4

You have an electrical gear selector interlock something UK spec disco's don't have, to get access to it u may have to remove to centre console but first look under electrical/repair/selector interlock in this link http://www.landy.pl/LandRoverDiscoveryWorkshop1995-1996.pdf

You can remove the interlock for good if you wish.

 

Last edited: Sep 3, 2010

smarty1972

New Member

• Sep 4, 2010

• #5

discool said:

You have an electrical gear selector interlock something UK spec disco's don't have, to get access to it u may have to remove to centre console but first look under electrical/repair/selector interlock in this link http://www.landy.pl/LandRoverDiscoveryWorkshop1995-1996.pdf

You can remove the interlock for good if you wish.

Click to expand...

Cheers Discool, thought i had something wrong with mine there for a bit.

 

K

kingsonlim

New Member

• Sep 5, 2010

• #6

thanks for the info guys....was in a rush to go out with the caravan friday afternoon when I found out that the disco can't be moved, and it's right at the front of the caravan....managed to use straps and pulley and got the caravan out of the driveway through the front lawn...and just got back now....

Bit more details on my problem on hand:
- autobox don't shift out of park
- all indicator decides to not function
- no brake lights when pedal is pressed

I'll be removing the gear selector interlock solenoid for now, to get the car moving, but having no brake lights and indicator, it isn't legal to go anywhere. Have checked that all fuses are okay.

Could someone also shed some light on where the brake light circuit is located (as described by bmp42), or does the problem lies elsewhere?

Thanks.

 

discool

Well-Known Member

• Sep 5, 2010

• #7

"Where the light circuit is located" better let BMP42 discribe that one, but there is a fused supply to the the ignition switch from there a fused supply to the brake lights via the foot operated brake light switch, the return path is via the vehicles body ground or earth what ever you wish to call it.
Get your self a Haynes Manual all the wiring diagrams are in there, also did you check the 60amp fuse in the engine bay fuse box?.

 

K

kingsonlim

New Member

• Sep 5, 2010

• #8

finally found the problem...though a little weird.......

it's the 15A fuse in the vehicle (fuse #1).....when looking at it it's not burnt out, but when tested with multimeter, its not passing through current....replaced and everything back to normal........

Thanks for all your input tho......am having my sunday afternoon pint now.....hehe!!!

 

discool

Well-Known Member

• Sep 5, 2010

• #9

Well done. I know there are some iffy fuses around the fuse element is spot welded to the two spades and in your case not very well.
I bought a box of 50 for a £1 as a "good idea" at a car show makes me wonder how good they are now.