M

marty_b

Active Member

• Jan 2, 2014

• #1

300tdi changing rear brake pads and discs got the hub off undone the 14mm hex bolts. Is there anything else needs doing. Trying seperate the disc from hub with hammer and broke the disc so I cant turn back now any ideas please

 

M

marty_b

Active Member

• Jan 2, 2014

• #2

 

Mark L

Well-Known Member

• Jan 2, 2014

• #3

Try and crack the cast of the hub part of the brake disc and it should drop off easy enough then.

Edit: with a good lump hammer.

 

bushwwacker

Well-Known Member

• Jan 2, 2014

• #4

Discovery 1 Brake Discs at www.rimmerbros.co.uk

 

barmatt

Well-Known Member

LZIR Despatch Agent

• Jan 2, 2014

• #5

use a cold chisel to get between the disc and hub.

 

robbh

Crazier than a box of frogs on acid

• Jan 2, 2014

• #6

I thought hitting the hub was a bad thing unless your replacing that too

I only ever tap hard all the way round the disc gradually and it eventually comes off.

 

barmatt

Well-Known Member

LZIR Despatch Agent

• Jan 2, 2014

• #7

robbh said:

I thought hitting the hub was a bad thing unless your replacing that too

I only ever tap hard all the way round the disc gradually and it eventually comes off.

Click to expand...

I never hit the hub directly, just use a chisel to get between them. Always worked for me.

 

M

marty_b

Active Member

• Jan 2, 2014

• #8

Thank you that worked old brake disc is now in 4 pieces but its off

 

barmatt

Well-Known Member

LZIR Despatch Agent

• Jan 2, 2014

• #9

marty_b said:

Thank you that worked old brake disc is now in 4 pieces but its off

Click to expand...

it doesn't have to be pretty, just effective

 

Chrisw8

Well-Known Member

• Jan 2, 2014

• #10

marty_b said:

Thank you that worked old brake disc is now in 4 pieces but its off

Click to expand...

........... mine came off in one piece !!!! lol

 

aaronmorris

Head's a shed

• Jan 2, 2014

• #11

Chrisw8 said:

........... mine came off in one piece !!!! lol

Click to expand...

Impressive Done that a few times albeit not on a landrover.

 

M

marty_b

Active Member

• Jan 2, 2014

• #12

The bad thing is that my brake pad had no meat left whatsoever and it had some how span 90 degrees in the the caliper

 

Ambriel

Active Member

• Jan 3, 2014

• #13

I've not done it on a Landy but I did have the two halves of a vented brake disc on our Zaffy separate a couple of months ago. Made for an interesting braking experience...