m4drx · Mar 19, 2013

Hi guys,

I'm looking at replacing my UJ's as i'm not sure when they were last done.

Do I do front and back and are they the same?

Its a 93 200tdi.

I was going to order 4 of these; RTC3291G | Propshaft UJ

any help appreciated

m4drx · Mar 19, 2013

anyone?

Thor1950 · Mar 19, 2013

get gnk they are the best...... and make sure they are greaseable

chezvegas · Mar 19, 2013

Do they need replaced? Of they are fine then I would leave em alone

m4drx · Mar 19, 2013

they seem fine. No play or signs of rust so may just grease them.

The early discoverys dont have the rubber coupling right...or am i going mad? Dont remember seeing one whilst under there

robbh · Mar 19, 2013

If you've got a 200tdi then no it won't have a rubber donut.
And if they are ok don't bother but when they do go like said get the greasable GNK ones.

m4drx · Mar 19, 2013

cheers buddy. Just the advice i needed.

I'll do them when they need doing!

thebiglad · Mar 19, 2013

robbh said:
If you've got a 200tdi then no it won't have a rubber donut.
And if they are ok don't bother but when they do go like said get the greasable GNK ones.

Err GKN actually.

dyte · Mar 19, 2013

same as your steering rod then

200tdi ayre · Mar 19, 2013

Yeah don't bother till they have play can last forever if looked after (almost)

I'm changing a D2 one tomorrow

m4drx

Active Member

m4drx

Active Member

Thor1950

Well-Known Member

chezvegas

Active Member

m4drx

Active Member

robbh

Crazier than a box of frogs on acid

m4drx

Active Member

thebiglad

Well-Known Member

dyte

New Member

200tdi ayre

Well-Known Member

Similar threads