MudHunter

MudHunter

Active Member
Bought a new UJ for the rear prop from Paddocks but it seems to be too big for the yoke. I put one cup in with the circlip but the opposite one wont go in anywhere near far enough for the circlip to go there. Any chance i got the wrong UJ?

this UJ
Propshaft UJ

1989 110

cheers
 
MudHunter said:
Bought a new UJ for the rear prop from Paddocks but it seems to be too big for the yoke. I put one cup in with the circlip but the opposite one wont go in anywhere near far enough for the circlip to go there. Any chance i got the wrong UJ?

this UJ
Propshaft UJ

1989 110

cheers
Click to expand...

Take it back out and check to see if any of the pins have fallen over ;)
 
MudHunter said:
Bought a new UJ for the rear prop from Paddocks but it seems to be too big for the yoke. I put one cup in with the circlip but the opposite one wont go in anywhere near far enough for the circlip to go there. Any chance i got the wrong UJ?

this UJ
Propshaft UJ

1989 110

cheers
Click to expand...

when i replaced mine i had a similar problem.
take the uj out and check that there isn't a burr or a dent in the edge of the yoke stopping the cup from going all they way in.

if their is a round chainsaw file should sort it easy enough
 
greasing the cups wont do any good if yu have a burr in the housing (or if yu crushed a housing in the vice :eek:).
 
You must log in or register to reply here.

Similar threads

dag019
which propshaft 110 rear.
Replies
3
Views
173
Hicap phill
H
S
big problems installing Universal Joints
Replies
11
Views
1K
steve2286w
steve2286w
F
Landrover 90 Diff problem?
Replies
10
Views
1K
Anaconda
A
S
mainshaft rear bearing removal
Replies
8
Views
1K
tottot
tottot
J
Air filter replacement.
Replies
6
Views
563
JimNm
J