D

Disco boi1300

New Member

• Jun 13, 2019

• #1

What’s the best way to go about sealing my d2

 

Henry_b

Think outside, no box required.

• Jun 13, 2019

• #2

Welcome

Silicone tends to work well.

 

K14

Well-Known Member

• Jun 13, 2019

• #3

Pick a nice hot week in the summer.
Give it a good clean / pressure wash.
Waxoyl it ( i use a compressor and parafin gun).
After doing it thoroughly the first time, I now give it a quick clean and waxoyl every summer.

 

RangeRoller dt

Well-Sprung Member

• Jun 14, 2019

• #4

I love this already....

I use plasterboard for my ceiling


Welcome to the forum

 

kermit_rr

Very

Full Member

• Jun 14, 2019

• #5

Hi and welcome!!
Tip of the day, don't seal your udders, nothing good will come of it

 

RangeRoller dt

Well-Sprung Member

• Jun 14, 2019

• #6

Title changed. 3rd time lucky

 

1988smithy

Well-Known Member

• Jun 15, 2019

• #7

Uberseal maybe?

 

RangeRoller dt

Well-Sprung Member

• Jun 15, 2019

• #8

Waxoil can seal dirt etc in. Make sure it’s tip top before layering it on

 

brianp38dse

Well-Known Member

• Jun 15, 2019

• #9

Welcome to loonyzone

 

N

Newinnwoodman

Active Member

• Jun 17, 2019

• #10

My preference is angle grinder with a wire brush in it for anything with rust bubbles or loose rust then spray old sump oil on minding your sensitive bits . Repeat every time she’s on the ramps.
I was working on an L322 today which had some major bubbles. Took them off and now ready for the oil or cream as the oil donor car had a blown head gasket

 

Hippo

Lord Hippo

• Jun 23, 2019

• #11

Welcome to the forum

 

R

Rodeo Joe

Well-Known Member

• Jun 23, 2019

• #12

Disco boi1300 said:

What’s the best way to go about sealing my d2

Click to expand...

Gaffer tape n lard.