harrytooth

harrytooth

Member
The bolt holes at the back don’t line up ? , does anyone know what is wrong
 

Attachments

  • image.jpg
    image.jpg
    338 KB · Views: 366
The tubs looks too high and there should be a plate riveted to the tub with 2 rivnuts in it if you go to yrm metal solutions look in 110 rear tub product number 097a it's called rear body mounting nut plate can't post a link cus I'm on the iPad and I don't know how to do it :oops: . Have you got it stuck on something under neath ?
Cheers Ian
 
Your rubbers on top of the bodymounts are probably too thick.
Get some fat mates to stand on the back or change them.
 
Here are some more photos, it looks like the rubber mounts are sitting flat on the chassis
 

Attachments

  • image.jpg
    image.jpg
    231.5 KB · Views: 444
  • image.jpg
    image.jpg
    257.6 KB · Views: 424
Stick a screwdriver in the tub and chassis hole and bend it down until you get the bolt in the other one. Once you get one in the others will be easier.
 
I put half a dozen tractor weights on the tub to get it sitting right. Easier than a few fat mates. That bit then lined up - just one tubular outrigger was about 15mm out and I had to pack it. It was an rc chassis
 
Def90man said:
I put half a dozen tractor weights on the tub to get it sitting right. Easier than a few fat mates. That bit then lined up - just one tubular outrigger was about 15mm out and I had to pack it. It was an rc chassis
Click to expand...
Was it the passenger side? My passenger side tubular outrigger was a similar distance out. :mad:
 
harrytooth said:
The bolt holes at the back don’t line up ? , does anyone know what is wrong
Click to expand...
Is this the 110 in your avatar picture? A small amount of movement at the other end of the tub will alter the height of that rear tub member. Have you fitted the bracket mounts that connect the front end of the tub to the centre cross section of the chassis?
 
Should have had the adjustable rear tub mounting, that's what I had ! Still had to fight the Bugger
 
if i lift the front of the tub up by 4 inches the holes go down enough to put a bolt through, but doesn't sit right
 
You can't yours has the tabs welded to the rear cross member 200tdi type. The td5 type is better as it has a plate with the tabs that bolts to the rear cross member.
 
Al2O3 said:
Is this the 110 in your avatar picture? A small amount of movement at the other end of the tub will alter the height of that rear tub member. Have you fitted the bracket mounts that connect the front end of the tub to the centre cross section of the chassis?
Click to expand...
no, it isn't, it would be nice if it was. I am trying to restore my first defender. Nothing has been secured to the chassis because it will be coming off again to be painted, just trying to make sure everything fits
 
harrytooth said:
no, it isn't, it would be nice if it was. I am trying to restore my first defender. Nothing has been secured to the chassis because it will be coming off again to be painted, just trying to make sure everything fits
Click to expand...
Is it a 90 then?
 
You must log in or register to reply here.

Similar threads

dag019
Seat belt bolt/fitting kit
Replies
1
Views
204
julianf
julianf
dag019
Fitting YRM extended second row floor upstand
Replies
14
Views
650
dag019
dag019
julianf
Heated seat kits for 300tdi era defender seats...
Replies
7
Views
454
dag019
dag019
V
TDCI 2007 What is this for?
Replies
0
Views
224
vtwin
V
dag019
station wagon second row seatbelts
2
Replies
24
Views
1K
dag019
dag019