A

Anaconda

Well-Known Member

• Oct 24, 2024

• #21

If you notice in your photo and mine the relevant symbols being used are all highlighted in white, the "spare" ones are highlighted in black.
Maybe that's the answer, if so you will then have to find out why/how it's illuminated.

 

H

Hicap phill

Well-Known Member

• Oct 24, 2024

• #22

Anaconda said:

Example below

Click to expand...

If you have the tilt symbol on your panel… remove it & sell it. Them are rare

 

A

Anaconda

Well-Known Member

• Oct 24, 2024

• #23

Hicap phill said:

If you have the tilt symbol on your panel… remove it & sell it. Them are rare

Click to expand...

Are they indeed, how much rare and why?

 

H

Hicap phill

Well-Known Member

• Oct 24, 2024

• #24

Anaconda said:

Are they indeed, how much rare and why?

Click to expand...

They were for lama. Tilt cab landrover type motor. Built in the 80’s bit like a 101

 

pwd281

Member

• Oct 24, 2024

• #25

Anaconda said:

If you notice in your photo and mine the relevant symbols being used are all highlighted in white, the "spare" ones are highlighted in black.
Maybe that's the answer, if so you will then have to find out why/how it's illuminated.

Click to expand...

Ok thanks ,

 

pwd281

Member

• Thursday at 17:25

• #26

Hi all, sorry for the delay. Got under the landy and no pipes leading from the gearbox to the front and can't see any thing that looks like a cooler. On the wiring loom that does the reversing senser on the gearbox there are two female terminals on the passanger side of the gearbox about 4 inches long one covered with muck and the other cleaner cant find anyrhing withing their reach to attach too. And the wires go into the chassis. So at the moment I'm trying to track the wires from the back of the light ,it disappears into a taped loom whick doesnt help. Ive also checked the oil leveles where i changed the oils no problems there. That's as far as its got .

 

H

Hicap phill

Well-Known Member

• Thursday at 17:40

• #27

Could that cable/conector have touched anything to make an earth? & put the light on

 

pwd281

Member

• Thursday at 19:28

• #28

That i don't know. I'll have another look tomorrow. Like i said, one very dirty with muck. The other looks surprisingly clean.

 

Scooby22

Well-Known Member

• Friday at 16:42

• #29

Manual gearbox will not have a gearbox temperature warning. They were for the auto box version.
Has the landy been converted or instrument cluster changed.

 

pwd281

Member

• Friday at 16:47

• #30

That i dont know, sorry. The light has either got a short or connection is going somewhere ?i put tje reg i to dvla before we brought it and came back as manual so maybe the cluster has been changed.