P

peters877

New Member
Hi, I have a 1989 110 fitted with the standard 2.5 TD engine (19J) and is using the standard LT77 5 speed box. My question is :- Is there another Transfer Box I can use to firstly reduce noise as I think my box is rather rattely. Secondly, to help on motorways an towing. I don`t want to change engine quite yet as it goes well, and gearbox is as sweet as a nut. Any info welcome. Thanks

If there is another Transfer Box I can use, How difficult is the job, any mods, does gearbox ave too come out!!
 
Last edited:
Iv just put a 200tdi in mine.

With it i put in the Defender 5 speed LT77 gearbox and the LT230 transfer box from the Disco!

I get all the ratio of the high range (For road) with the same low range gear ratio of the defender :D

Scott
 
easy,but you need to tap holes as hand brake different
 
No mate you will have to drop your gearbox out as one of the mounts is actually on your transferbox.

Its easy enough but will take a little prep, ie Props off, tunnel off, floor panels off, undo bellhousing bolts etc

Once youve got your box out youl be able to identify which bolts and linkages you need to take off mate. Pull the gear and tranfer box apart and mate your new one up in the reverse order you took off.

Its a fair bit of work but dont be put off its fairly straight forward, just have a good weekend at it and take ya time! Im no mechanic and i did it!

Good luck mate, Scott
 
scott02464 said:
No mate you will have to drop your gearbox out as one of the mounts is actually on your transferbox.

Its easy enough but will take a little prep, ie Props off, tunnel off, floor panels off, undo bellhousing bolts etc

Once youve got your box out youl be able to identify which bolts and linkages you need to take off mate. Pull the gear and tranfer box apart and mate your new one up in the reverse order you took off.

Its a fair bit of work but dont be put off its fairly straight forward, just have a good weekend at it and take ya time! Im no mechanic and i did it!

Good luck mate, Scott
Click to expand...

Right so how come I undid and separated the transfer box and fitted a transfer box in situ using a trolley jack to support gearbox? further to this others have done the same

 
scott02464 said:
No mate you will have to drop your gearbox out as one of the mounts is actually on your transferbox.


Good luck mate, Scott
Click to expand...

Bollox do ya I just took the transfer box off me scrapper disco with out taking the gear box out.
just undo the 2 bolts that hold the transfer box onto the gearbox mount undo propshafts undo the nuts and bolts holding the transferbox to the gearbox and undo the handrake cable and it slides straight out.
 
no your a fooking idiot, taking the transfer box out complete with gearbox is totally un necessary-further to this on your back it's a ****ing monster even with three/four people..

removing the transfer box is straight forward and can be done with trolley jacks and two people.


Lastly teaching ya granny to suck eggs-wtf are you on
 
fanatic said:
no your a fooking idiot, taking the transfer box out complete with gearbox is totally un necessary-further to this on your back it's a ****ing monster even with three/four people..

removing the transfer box is straight forward and can be done with trolley jacks and two people.


Lastly teaching ya granny to suck eggs-wtf are you on
Click to expand...

Laid on your back..... Three or four people to help.....? What the ****! I did it on my own you jumped up sarcastic prick!!

What a nasty ****er you are!
 
fanatic said:
no your a fooking idiot, taking the transfer box out complete with gearbox is totally un necessary-further to this on your back it's a ****ing monster even with three/four people..
Click to expand...

That fooking gearbox is heavy enough on it's own with nowt else attached to it and the body removed from the disco.


removing the transfer box is straight forward and can be done with trolley jacks and two people.
Click to expand...
yup did mine on me own but as above no bodywork on the disco.


Lastly teaching ya granny to suck eggs-wtf are you on
Click to expand...

I tried teaching me granny to suck cock. But she just didn't get it. :( Mind when me dad found out I'd had her exhumed he weren't best pleased.. :eek: :D :D
 
scott02464 said:
Laid on your back..... Three or four people to help.....? What the ****! I did it on my own you jumped up sarcastic prick!!

.

What a nasty ****er you are!
Click to expand...

Your telling me you removed a complete transfer box and gearbox just for a transfer box change-thick as ****, or more likely full of ****. Mines an lt85 not lt77 but it's still not anyway like a front wheel drive box weight

Nasty ****er-if you say so,funny how the regulars find me ok.

I'm voting you **** of the week

Your a cock, if you want to play penis sizes -mine fills a pram -bring it
 
fanatic said:
Your telling me you removed a complete transfer box and gearbox just for a transfer box change-thick as ****, or more likely full of ****. Mines an lt85 not lt77 but it's still not anyway like a front wheel drive box weight

Nasty ****er-if you say so,funny how the regulars find me ok.

I'm voting you **** of the week

Your a cock, if you want to play penis sizes -mine fills a pram -bring it
Click to expand...

No, i didnt remove the gearbox just to fit the transfer box. Like i said in my first post i said i did it all when i put my engine in!

Whats all this **** about penis sizes?

And i am too a regular on here but i still think your a jumped up prick!
 
good evening, :D glad you like it

tonto- your digging yourself a hole, further to this your making yourself look like a ****. why not just admit removing transfer box on it's own is
1)possible
2)safer than complete box and transfer box.

Regular, more like occasional **** stain-but lets go for it if you wish(I'm laughing at you not with you)
 
Last edited:
Ok sweetheart you win :D

Still think your a jumped up ****, it would be a better place if there werent peolple like you around with a nasty attitude to everything
 
scott02464 said:
it would be a better place if there werent peolple like you around with a nasty attitude to everything
Click to expand...

no it wunt. It would be boring like LR4x4 or the LRO/LRM sites. With no fooker posting (unless it's drivel.) If ya want a sad boring heavily censored site, then go post on one of the above. LZ is supposed to be full of ****takers and cuunts, it's why the majority of us come on here. :rolleyes:
 
scott02464 said:
Ok sweetheart you win :D

Still think your a jumped up ****, it would be a better place if there werent peolple like you around with a nasty attitude to everything
Click to expand...

I'm not looking to win, funny enough I think your misguided.

I'm not super human, hoped you would wind your neck in-because your looking stupid.
Love you sweety
 
You must log in or register to reply here.

Similar threads

1
Transfer Box change 1.4 to 1.2
2
Replies
25
Views
2K
Brown
Brown
dag019
A question of gearboxes
Replies
16
Views
934
Skolmate
Skolmate
D
R380 & Transfer Box Balance Point ?
Replies
3
Views
749
Brown
Brown
D
R380 & Transfer Box Balance Point ?
Replies
4
Views
801
dogdog1
D
P
Transfer Box oil seals - are they the same on both sides of the case? - Puma 90 2.4
Replies
3
Views
898
Puma_Boy
P