Might have to get a set for AWDC comps they are just awesome!!


Landy looks goody matey!! Bet you can't wait to try it out!!
 
Down pipes and y pipe fitted
F3E8A558-4799-47F3-A95E-D3D7A8E23845-2684-0000024094307CD6.jpg


I take it these are the power inputs and the earth for the ECU ?
EF1C7B41-F575-4CB8-B792-0FBC7133CBAE-2684-000002408AE1400B.jpg
 
Brown wire goes to battery live +,

White goes to Ignition switch live (ONLY live when in run position),

Purple/white is + feed to fuel pump,

Black and white must be earthed
 
red and black should be coil feed and neg from the looks of things, mines a white and red on the pos side but its the old flapper version
 
Flexed the suspension to check it didn't catch the oil filter on full flex on anything, gladly it's miles away


1322C3A8-571A-408F-960E-D0A08846AF19-2515-00000230F41B86AD.jpg



55715F76-1D93-45FE-9220-A323EA873097-2515-00000230E8B57762.jpg


BF5851A0-FBEB-42F8-94A9-3BA94F564103-2515-00000230DC66E01C.jpg


0DCC3FF4-61BE-4F70-BC04-84C81FC98531-2515-00000230D0B0653A.jpg


Yeah im pleased with that flex :D

And took the manifold off to get a sheared bolt out and changed the gaskets ....

806C91D5-6524-408E-BF9E-CC5ACDB1C2B8-2515-00000230C26D2FF4.jpg

Looking a very nice landy. Very impressed
 
Hey it looks quality that jimbo, top bloody banana. Very sexy in red with black cappings :p

Bit bloody gay but very sexy :D

Regards your MAF location that's no problem at all, the only issue you have have is an element of delay if you blip the throttle but I don't at this stage think it will rear it's head.

If you can't get it to lose its flat spot then try move the MAF closer.

Otherwise bravo! :D
 
Update???

It must be on the road going on the previous progress?
 
Guess the v8 work has slowed things a little or maybe impromptu holiday OR mental breakdown and has gone for a long sleep in the toolbox :p
 
Guess the v8 work has slowed things a little or maybe impromptu holiday OR mental breakdown and has gone for a long sleep in the toolbox :p

Complete lack of progress lately I've been so busy with work and sorting things I haven't had much free time, but me and a mate are having a session on Sunday :)
 
PB only asking because I was asked and I didn't honestly know. I made my series rear x member from 8mm 5x3 inch box simply because that's all I could get at a reasonable price at the time. Seriously OTT. Tubes the tow ball and fully welded no holes.

I was asked if your X members were ALRC legal I said I don't see why not they're strong enough and then they asked about it being a box I was uncertain regs say no weaker then original so I see no probs which is what I told the guy
Asking the question.
 

Similar threads