T

tony worsley

Member

• Feb 10, 2008

• #1

i have a traction failure fault on my display too .. but drives fine .... any ideas

 

B

BigJock2005

Active Member

• Feb 10, 2008

• #2

Have you changed anything? I got this fault after changing a wheel one night. Next day I realised that the spare was an inch larger in diameter! This must have caused the wheels to rotate at slightly different speeds, which brought up the "Traction Failure" alarm, but it drove fine.

If you haven't change anything, I'd suggest one of the speed sensors on the wheel, but this should bring up an ABS light also.

Jock

 

robp38

Well-Known Member

• Feb 10, 2008

• #3

check ampage in battery mine came on when battery was low fine once battery was charged !!

 

T

tony worsley

Member

• Feb 10, 2008

• #4

no but i have just put new rubber on the fronts??? is there a sensor or something which can get knocked

 

P

P38Spares

New Member

• Feb 12, 2008

• #5

robp38 said:

check ampage in battery mine came on when battery was low fine once battery was charged !!

Click to expand...

I agree, when the batt is low then the 2 classic signs are that the traction fault will come up followed by the gearbox fault, charge or replace the battery first and see if the faults go away.

Andy