kermit_rr

Very

Full Member

• Jun 19, 2020

• #1

Spent quite a bit of time going thru all the nanocom screens to see what's available, make sure there aren't any error codes etc and noticed that my tps goes from 0, to 76 at full throttle.
Is it normal that a tps doesn't read 100 at full throttle? Or is it poorly?
Engine seems to run fine and accelerates ok, but i don't drive at WOT all the time. I've checked that the throttle opens fully.
I'm not one to fix something that's not broke, but if a new one will make a massive difference then it's worth doing
Thanks

 

R

romanrob

Well-Known Member

• Jun 20, 2020

• #2

I thought the TPS screen read a voltage in Nanocom ie c 0.6V at idle, in the GEMS, at least. Maybe there's another field i'm not thinking of. If it ain't broke don't fix it IMHO

 

mikieman

Well-Known Member

• Jun 20, 2020

• #3

I see this is the classic “ It’s running too good ,there has to be something wrong.. “

 

R

romanrob

Well-Known Member

• Jun 20, 2020

• #4

mikieman said:

I see this is the classic “ It’s running too good ,there has to be something wrong.. “

Click to expand...

lol

 

kermit_rr

Very

Full Member

• Jun 20, 2020

• #5

It's more a case of, i don't know any better, just i'd expect a % value to show 100 when fully open.
The only comparison i have is my bike which goes 0-100