pwood999 · Jul 18, 2017

and then there's the worn threads where steel bolts go into aluminium . . . ..

I agree on always slackening the TW spring when no in use. Most stuff is by feel these days, but had to learn that the hard way in my yoof.

Grrrrrr · Jul 19, 2017

neilly said:
Plus you cannot beat a decent length of scaffold pole....................always worth having in reserve.

Cheers

Got that but not sure my breaker bar can handle the torque. It only has a pin at the top holding the end on. It was bending like a banana trying to get my hub nuts undone!

neilly · Jul 19, 2017

Grrrrrr said:
Got that but not sure my breaker bar can handle the torque. It only has a pin at the top holding the end on. It was bending like a banana trying to get my hub nuts undone!

Have looked at my 3/4 bar bending before and thought it could be worthwhile welding the pivot point up with lashings of weld to make sure it stays put.

Cheers

pwood999

Well-Known Member

Grrrrrr

Technician, Bodgit & Scarper Ltd

neilly

Well-Known Member

Similar threads