V

Vex918

New Member

• Jan 19, 2011

• #1

Well after a whole 2 months of the beast running fine (well almost) on my way into work tonight the thump from the o/s which has been happening everytime i turned right (I put it down to a anti rollbar bush) has now started to rumble. It happens when the wheel is turned and the disco is moving. Havent had time to jack it up yet to have a look............ Any thoughts CV Joint, wheel bearing ?? also as i pulled into the carpark the 3 amigos came on... Deep joy

TD5 with ACE

 

jamesmartin

Well-Known Member

• Jan 19, 2011

• #2

in which case wheel brg

 

jamesmartin

Well-Known Member

• Jan 19, 2011

• #3

or cv

 

V

Vex918

New Member

• Jan 20, 2011

• #4

Probably both knowing my luck

 

thebiglad

Well-Known Member

• Jan 20, 2011

• #5

Unfortunately being a TD5 (D2) it's not just a wheel bearing it's a new hub - if that is the problem?

Have a look on Ebay, new ones go for between £160 and £260 (LR).

 

V

Vex918

New Member

• Jan 20, 2011

• #6

Thanks... already looked at the cost of replacment 160 for a hub 65 for a cv thats why i was hoping it was the cheaper option..... After checking, there is movement on the hub, but on full lock and spinning the wheel it sounds like the cv is shot also.....Ho Hum the joys of Landy ownership