Turboman

Mab An Gov

• Aug 10, 2015

• #21

RomeoV said:

Well see i adjusted them as per normal but not done any mega mileage in it so i have no idea why that would be a problem now, worth a readjustment i guess

Click to expand...

Try locking them all against the drums, pedal should be rock hard if no air. Then slacken and adjust.

 

RomeoV

Member

• Aug 10, 2015

• #22

Will try that should i do that for all 4 wheels? What do i do if it isnt and believe me i have almost tried every method of bleeding the brakes

 

Turboman

Mab An Gov

• Aug 10, 2015

• #23

RomeoV said:

Will try that should i do that for all 4 wheels? What do i do if it isnt and believe me i have almost tried every method of bleeding the brakes

Click to expand...

All four wheels at once. I use a vacuum extractor on the nipple, saves a lot of pumping on the pedal. And some say it is good to jack up the front of the vehicle. get the master cylinder more level. I have never had to do this, though.

 

Turboman

Mab An Gov

• Aug 10, 2015

• #24

Turboman said:

All four wheels at once. I use a vacuum extractor on the nipple, saves a lot of pumping on the pedal. And some say it is good to jack up the front of the vehicle. get the master cylinder more level. I have never had to do this, though.

Click to expand...

Forgot, it is normal for the pedal to go down when the servo comes on, shows the servo is working.

 

RomeoV

Member

• Oct 2, 2016

• #25

So turned out i think the pedal had a small amount of play in it that i thought wasnt normal due to my other series being rather responsive on the pedal not only this i used a gunsons eezibleed which brought the pedal up hard. After replacing every single part of the breaking system bar the servo itself, quite frustrating

 

D

divie

Well-Known Member

• Oct 4, 2016

• #26

With servo brakes on a Landie first thing to check is the free play at the master cylinder push rod. You need around 1/6" 1.5mm in new money.

 

Cliffmac99

Member

• Oct 12, 2016

• #27

I had the very same problem which I reported on this site, in the end I renewed the master cylinder,old one seemed fine, but it worked!! My brake pedal is as hard as a porn star on Viagra!!