Exactly. I keep telling myself that too and not to rush things.
Exactly. I keep telling myself that too and not to rush things.
Bits have arrived 
Nice!! I'm going to give the rear a shot this weekend. I don't know if any help and not telling you how to suck eggs but there's a few pictures of installation process here that I found when ordering mine:
http://www.froggatts.co.uk/page20.html
http://www.froggatts.co.uk/page20.html
I have done most of it before. It’s the motivation that keeps eluding me .
Got to prep and paint those parts prior to fitting.
.Got to prep and paint those parts prior to fitting.
Good to see some progress Glad you are saving another one
I have a similar blast pot, and use a frying pan spatter guard to sieve the "blast media" - something like item 372198190174 on the bay .... if the media is full of carp, then an ordinary kitchen sieve first, followed by the spatter guard. I'm fortunate to have enough air for an air fed mask, but for quick outside jobs I've found a medical grade mask as good - the one I use is a Drager..
Glad you are saving another oneI have a similar blast pot, and use a frying pan spatter guard to sieve the "blast media"
- something like item 372198190174 on the bay .... if the media is full of carp, then an ordinary kitchen sieve first, followed by the spatter guard. I'm fortunate to have enough air for an air fed mask, but for quick outside jobs I've found a medical grade mask as good - the one I use is a Drager..
i got these..... as they have a 2mm mesh...Good to see some progress
I have a similar blast pot, and use a frying pan spatter guard to sieve the "blast media"
https://www.ebay.co.uk/itm/BONSAI-S...e=STRK:MEBIDX:IT&_trksid=p2057872.m2749.l2649
dandit1200
Active Member
Love pickups need to finish mine off when i stop playing with it lol turned out a very capable off road beast.here is a pic .good luck with your build guys...danno out .....
Ordered new sills and galv sheet for bulkhead side panel (2mm)
Removed brackets from old bulkhead side panel.
Degreased and kurusted NS sill mounting points etc.
Removed brackets from old bulkhead side panel.
Degreased and kurusted NS sill mounting points etc.
new sill box section turned up today.... 120 x 60 x 3.6mm .
still waiting for cardboard sheet and galv sheet to arrive.
Started shot blasting new bulkhead section. Bugger me, does it get thru a lot of sand. I hope to do a bit more tomoz. dont think I ill have time to shotblast vehicle bulkhead area yet.
Some pics of the Bulkhead corner piece. It can be easily seen how the corrosion runs, unseen, under the seam sealer. Having said that, the Shot Blaster really does a good job, of cleaning the metal, as well as covering everything within 30 feet with sand.
.still waiting for cardboard sheet and galv sheet to arrive.
Started shot blasting new bulkhead section. Bugger me, does it get thru a lot of sand
. I hope to do a bit more tomoz. dont think I ill have time to shotblast vehicle bulkhead area yet.Some pics of the Bulkhead corner piece. It can be easily seen how the corrosion runs, unseen, under the seam sealer
. Having said that, the Shot Blaster really does a good job, of cleaning the metal, as well as covering everything within 30 feet with sand. 
Looks like we could be welding on Friday
If not the box section it'll be that footwell.
Don't forget you need to trim off the roll cage legs so that they are above the box section, unless we are going to make removing that the first thing we do when I rock up?
If not the box section it'll be that footwell.
Don't forget you need to trim off the roll cage legs so that they are above the box section, unless we are going to make removing that the first thing we do when I rock up?
I think fitting the mounts to the box section and cutting it to length will be Friday as I won’t get the bulkhead corner and body cleaned and prepped by then.
We can cut, cap and weld on the mounts. We could duplicate the second box section too and then it just needs the body mounts when we come to do the drivers side.
thanks - but we havent reached base camp yet
thanks - but we havent reached base camp yet
Worth the wait mate , just don’t wreck it on ur first time off road
thanks - but we havent reached base camp yet
One bite at a time
Besides, I think once we have one side done it will begin to feel like progress, the other side should go faster.
Worth the wait mate , just don’t wreck it on ur first time off road
If he does then I want first dibbs on salvage
Got the bulkhead finished blasting, Kurusted and acid etch primed today,One bite at a time
Besides, I think once we have one side done it will begin to feel like progress, the other side should go faster.
.New panel for top of bulkhead side turned up today. waiting on cardboard to make up template
