Fhit-Slicker

Fhit-Slicker

Member
Ok so I did buy a lemon, to many issues, mechanical and more rot (chassis and body) than you could shake a stick at etc etc.

My issue was having to use it every day for work travel and fix it up at the same time as well as putting fuel in the thirsty old girl, so had to pass it on, but it has given me a taste of the fun they are and how relatively easy they are to work on so I WILL be getting another, but I will be a lot more fussy next time with the condition of it, I have a little run around now so the plan is to keep saving and keep looking for a better one, and if a repair job takes 2-4 weeks off the road it doesn't matter as I have the run around.

The plan is to get one, fix her up if need be and then when done use it.....................

Just like to thanks you guys for your help and advice that you gave with the issues (brakes) I had with the other one, so I will be back....................asap

cheers folks ;);)
 
That sounds a plan mate. I’ve found sometimes I need to walk away from a job on mine and spend the hours i do on the motorway thinking a way around it or hassling members on here for their answer lol.
There’s no rush with fixing then - get half way through a job and see something you don’t like or needs replacing? Walk away and order it - you don’t to get the car roadworthy for Monday morning and can just order your parts.
A word of experience - you will struggle to find one without rot. I don’t think body rot is hard to fix at all but chassis rot is time consuming. I’ve just got my rear wheels back on after a year of axle stands and I get on mine most weekends.
Check these:
Rear crossmember particularly around bushes
Rear alpine windows
Front wings/arches
Outriggers and mounts
Boot floor
Main floor
B and c pillar bottoms
Rear tub and outer arches
Fuel tank strap

Chassis wise most of my issues have been at rear so check:
Spring seat mounts
Fuel tank strap brackets
Any outriggers
Rear chassis cross member
Suspension top mount bracket area - water creeps behind. If metal looks a bit wavy I bet it’s rotten.

Owning a d1 will involve welding. The level of welding will be dependent on above. As mentioned body is easy. Chassis takes fabrication and time and is a lot more demanding. When you buy it, check the relevant project threads and assess rust straight away. Get it protected.
Good luck with the purchase - hope you find a clean one!
 
Lol I had the same with my d1 van, had it for six weeks before I threw in the towel.
My mate I sold it to is happy as with it though. Mind you he has the time to pour into a truck with a rotten chassis.
 
resto_d1 said:
That sounds a plan mate. I’ve found sometimes I need to walk away from a job on mine and spend the hours i do on the motorway thinking a way around it or hassling members on here for their answer lol.
There’s no rush with fixing then - get half way through a job and see something you don’t like or needs replacing? Walk away and order it - you don’t to get the car roadworthy for Monday morning and can just order your parts.
A word of experience - you will struggle to find one without rot. I don’t think body rot is hard to fix at all but chassis rot is time consuming. I’ve just got my rear wheels back on after a year of axle stands and I get on mine most weekends.
Check these:
Rear crossmember particularly around bushes
Rear alpine windows
Front wings/arches
Outriggers and mounts
Boot floor
Main floor
B and c pillar bottoms
Rear tub and outer arches
Fuel tank strap

Chassis wise most of my issues have been at rear so check:
Spring seat mounts
Fuel tank strap brackets
Any outriggers
Rear chassis cross member
Suspension top mount bracket area - water creeps behind. If metal looks a bit wavy I bet it’s rotten.

Owning a d1 will involve welding. The level of welding will be dependent on above. As mentioned body is easy. Chassis takes fabrication and time and is a lot more demanding. When you buy it, check the relevant project threads and assess rust straight away. Get it protected.
Good luck with the purchase - hope you find a clean one!
Click to expand...

Cheers dude, sounds like they were made of tin foil, proper rot boxes by the sounds of things aren't they?, I will do my very best to find a better one ;)

BravoNovember said:
Lol I had the same with my d1 van, had it for six weeks before I threw in the towel.
My mate I sold it to is happy as with it though. Mind you he has the time to pour into a truck with a rotten chassis.
Click to expand...

Yeah it just needed to much doing to it, would of loved to do it but it would of been a full resto job which can take years and thousands of quids, the bloke that bought mine was quite happy with it, not sure he looked to closely though, and he was supposed to know landrovers :rolleyes:

resto_d1 said:
So time consuming. I’ve rebuilt probably 80% of my rear chassis
Click to expand...

Very very time consuming plus I don't own a welder (but will when need be), so you may of been better putting a new chassis on it then? think mine needed a new body too, so may as well of bought a new one by the time I'd finished it :eek:
 
I think a new chassis and body would have been a better idea yes lol. If it keeps coming back I’d probably buy another and get it galvanized. Funds didn’t permit that and hopefully it won’t come back. Check the threads before you spend money mate as some stuff isn’t worth bothering. PM me when you get it if you like and I’ll send you some methods and products. I’m no expert but have learnt a lot about trying to sort it over last year
 
resto_d1 said:
I think a new chassis and body would have been a better idea yes lol. If it keeps coming back I’d probably buy another and get it galvanized. Funds didn’t permit that and hopefully it won’t come back. Check the threads before you spend money mate as some stuff isn’t worth bothering. PM me when you get it if you like and I’ll send you some methods and products. I’m no expert but have learnt a lot about trying to sort it over last year
Click to expand...

But then your talking full resto with body and chassis :eek: thats before the mechanical side of things, before you know where you are you've spend x amount and have a new truck lol Believe me I've learn't a lot from my 1st mistake and will be much more careful next time, thinking logically it would be better to find one that needs an engine or box rather than chassis/body issues, if you can find one.............................;)
 
You must log in or register to reply here.

Similar threads

D
1999 Td5 running roughly...
Replies
3
Views
585
Stanleysteamer
Stanleysteamer
G
Disco 2 TD5 white smoke at idle
Replies
18
Views
725
GaryWrench
G
MAF Diver
Disco 2 Is my ACE leaking fluid at the actuator arm? New bushing?
Replies
9
Views
521
MJI
MJI
L
Disco 3 (LR3) Oh dear.
Replies
14
Views
724
Stanleysteamer
Stanleysteamer
sonicm1etn
intermittent completely dead fault TD5 D2
Replies
7
Views
456
Shedload
S