I got a new front wheel bearing fitted in Tuman (Russia) and that left me 5 days to do 4000 km to the Mongolian boarder because my visa was due then.
Started out at 4 am and within 100 km the TC and ABS fault came up.
they must have disturbed the sensor but as I had to get to the boarder I have not had time to fix it.
Got to the boarder in time and first thing when I get to Mongolia get fined for a cracked windscreen what next?
Will look at the Sensor tomorrow as I am now in Ulan Batar staying at the most friendly Guest Houst in this part of the world but that could change soon as it has new owners now.

I bet you got a big wallet for instant fines
Ensure sensor if fully seated and wires .

Well I am slightly envious anyway
Hope you get it sorted.
Any chance of a few pics of your travels?

If it is not a loose abs sensor at the front where the bearing was changed, check that the hub nut is tight.

Really.


Good luck.

SpiggyTopes said:

If it is not a loose abs sensor at the front where the bearing was changed, check that the hub nut is tight.

Really.


Good luck.

Click to expand...

Got it on diagnostics and all voltages were good but pulled sensor anyway and found it was damaged as if they pulled the hub without removing the sensor first but still shows it working with Nanacom but fault Nanacom has thrown up is brake light switch so could be just coincident and as i cannot get either a brake light switch or sensor here (in Ulan Batar Mongolia) i will have to live with it but I have adjusted the brake light switch but havn't road tested it yet but the fault could be cleared without coming back so far!
Hub nut is tight.