nickh75
Well-Known Member
yep it was bloody lovely washed donw with a few:beer2: :beer2: :beer2:
now whats wrong with me landy?
crookedspireite
New Member
fook the mushrooms!!! liking ya new tyres though
nickh75
Well-Known Member
bustersbus
Well-Known Member
'Ere Nick, WTF's wi' the salad!!!:hysterically_laughi :hysterically_laughi :hysterically_laughi
nickh75
Well-Known Member
don't think it can be the springs as i got a set from a mate who took them off(nearly new) to fit a spring lift in the summer.
and both sets of springs show the exact same problem with the exact same measurements from both sets of springs,
still shouting panhard rod to me?
is that with tea or coffee and when can i come round you said your mate gave you the springs silly thought maybe , but did he give you a pair off the same axle cuz i changed mine for new and they looked the same off but arse sits very low compared to front can"t be arsed to swap over tho
nickh75
Well-Known Member
i think the wife is trying to get me to lose weight from xmas and eat healthy
:beer2:
bustersbus
Well-Known Member
Ahhh, ah see now... She substituded the fried bread fur it!i think the wife is trying to get me to lose weight from xmas and eat healthy
nickh75
Well-Known Member
tea?? coffee????
NO NO NO Lager
yes they were a pair an i swaped em an got the same measurements on and off the landy
nickh75
Well-Known Member
only problem is if i take off the spacers the tires won't fit
an yes tires are all 235 85 16 insa dakar fitted 2 weeks ago.
have you any idea how long it took to put them bloody spacers on?
vivnap
Banned
only problem is if i take off the spacers the tires won't fit
an yes tires are all 235 85 16 insa dakar fitted 2 weeks ago.
have you any idea how long it took to put them bloody spacers on?
:hysterically_laughi to long by the sounds of it ! i dont know what to suggest other than what you already suspect.
nickh75
Well-Known Member
ok you said it PI#S OFF
ound: yes mate all front 27 psi an rear 32 psi
bustersbus
Well-Known Member
Are yer shox new nick and are they the ****part ones?
nickh75
Well-Known Member
only thing i can think of is to fit dislocation cones on the back to make sure the springs are located the same?
what do ya think would it help?
nickh75
Well-Known Member
they were new in the summer buster, i fitted the back first and then the front
all new monroe's
well looking at u fotos i would say the 1st pic is the osr it dont look to good or its the cam angle it seems to bow in to the chassis i measured mine b4 i put mine on but i was told later that the front set are slightly weaker than the back as it was to compensate when towing if its rite a i dont know seems plausible tho
as it was to compensate when towing if its rite a i dont know seems plausible tho
