D

discomania

Well-Known Member

• Apr 8, 2014

• #41

buresoft said:

Everything has to be dismantled to move parts from the old to the new Land Rover.

I found a strange device digging in electrics.

It looks like an electric thermostat and it is connected with a box for heating. What is it?





There are two relays and a probe that is inserted into the box with the radiator.

Click to expand...

Impressed with your work - good to see you doing this and saving a Disco!

 

buresoft

Member

• Apr 11, 2014

• #42

Rain again



Progress is here...



Heating unit finaly...



Now yust to connect everything and we are ready to drive again

 

buresoft

Member

• Apr 13, 2014

• #43

:tea:

Finished

 

thebiglad

Well-Known Member

• Apr 13, 2014

• #44

Congratulations :cheer2::jaw::drum:raise:

 

buresoft

Member

• Apr 13, 2014

• #45

Not an easy job but...



Fitting alternated dash board...



Ouch Miles vs KM...



Steering in mint condition lovely.

 

buresoft

Member

• Apr 13, 2014

• #46

And Steering on the right left side



After 15 days, finnaly battery connected and everything works perfectly :tea:

 

Last edited: Apr 13, 2014

markSX

Active Member

• Apr 13, 2014

• #47

That's an awful lot of work, well done.

 

Mr Noisy

Coming in your ears.

• Apr 13, 2014

• #48

Exceptional.

So have you modified the loom to your custom specification?

 

buresoft

Member

• Apr 13, 2014

• #49

Yes, Webato and Parrot installed. I did not move ABS unit. In the place of this unit on the right side I installed Parrot and Webasto electronic..

 

Mr Noisy

Coming in your ears.

• Apr 13, 2014

• #50

Very nice, inspirational

 

yellow90

Banned

• Apr 13, 2014

• #51

hell of a project mate im very impressed with this !

 

700Quid

Active Member

• Apr 14, 2014

• #52

buresoft said:

And Steering on the right left side



After 15 days, finnaly battery connected and everything works perfectly :tea:

Click to expand...

Outstanding... You are an artist sir!!

 

buresoft

Member

• Apr 19, 2014

• #53

Now mechanical stuff...



Everything must be removed from old one and transfered to new...



Heavy ... easy to break some bones.... :violent:

 

D

discomania

Well-Known Member

• Apr 24, 2014

• #54

How are you getting on with this? Excellent work, if you put your mind to something and get on with it it's amazing what you can achieve.

 

buresoft

Member

• May 11, 2014

• #55

I'm not finished yet, I have to replace chassis. So first old one needs to be washed:



Old body has been removed and scrapped.



Engine and gearbox out, everything prepared to put body on this chassis.

 

R

Rasher

Active Member

• May 11, 2014

• #56

Bloody hell. You dont mess about.

 

Mark L

Well-Known Member

• May 11, 2014

• #57

What a superb thread.
As Noisy says - very inspirational.

 

Larry365

Active Member

• May 12, 2014

• #58

Excellent work mate. Can't begin to imagine what hell you went through with the wiring. The pics don't show the swearing.

Well done.

 

F

flat cap andy

Active Member

• May 13, 2014

• #59

Epic work....I couldn't even begin to do that...well done

 

Spong

Well-Known Member

Full Member

• May 13, 2014

• #60

Why is this man still a 'junior' member? After this thread I should think 'Demi-god' was more appropriate...