Hugh
Member
Grrrrr. My wife's 2003 Td5 keeps cutting out. No warning symptoms or stuttering - it just dies. Luckily the events to date have been whilst travelling slowly, but it could be dodgy at speed.
It has had two new fuel pumps and those copper injector seals have replaced but it keeps doing it.
Nothing shows up on diagnostics.
The fuel filter was replaced in March, so not long ago.
Battery voltage fine and terminals clean and secure.
I assume the inertia switch would be highlighted in the diagnostic data if it had cut-in erroneously?
Once it dies, it dies and it is game-over. Only once has it been possible to get it going again, by using the bleed procedure.
Thanks
Hugh
It has had two new fuel pumps and those copper injector seals have replaced but it keeps doing it.
Nothing shows up on diagnostics.
The fuel filter was replaced in March, so not long ago.
Battery voltage fine and terminals clean and secure.
I assume the inertia switch would be highlighted in the diagnostic data if it had cut-in erroneously?
Once it dies, it dies and it is game-over. Only once has it been possible to get it going again, by using the bleed procedure.
Thanks
Hugh