As soon as you depress the clutch cruise control will cut out
loudandproud205
New Member
You just press resume.
Clutch works the same as pressing the brakes.
Ideally the engine will rev itself up before the incline gets steep and the auto box would kick down, some times it just drags the arse out of it and and just tries to pull along with road speed dropping as it can't compensate enough.
Clutch works the same as pressing the brakes.
Ideally the engine will rev itself up before the incline gets steep and the auto box would kick down, some times it just drags the arse out of it and and just tries to pull along with road speed dropping as it can't compensate enough.
navigator16078
New Member
so is it as easy as that just plug in the switch screw it on what about the button you put in the dash tho?
biggeeeee
Retired - Living the dream
Remove the bottom blank on the RHS of instrument cluster, wiring should be there, plug into switch, push switch into dash....simples
Headtester
Active Member
I bought one from a breakers and fitted it. Quite straightforward but follow the Rave instructions on removing the airbag properly.Hi, I have a 03 discovery XS TD5 manual and have seen a kit on Ebay for cruise control ,it seems to consist of a switch and the controls for the side of the steering wheel. Has anyone fitted this kit and does it just "plug in and play"?
You need the dashboard switch, the steering wheel switch and mounting bracket. You will also need to cut the hole for the steering wheel switch - it's just the mirror image of the stereo control, a dremel makes it easier.
After that it's just plug and play, the wires for the dashboard master switch are behind the existing switch blank and the steering wheel control wires are behind the the airbag unit.
I got my parts from a breakers but they can be seen here and here and here
Hope this helps.
groenendael
Active Member
biggeeeee
Retired - Living the dream
Sure is
