KISSMYAURA · Oct 8, 2022

Thanks to Paul at landrover connectors he got me the throttle pot connector and the ecu pins out for next del del.
Connected a trailer light wire (7 core) to the throttle pot, then crimped ecu pins to the other end,
Removed the orginal wires for ECU plug and bobs yer mums live in lover.
Just used long nose pliers to crimp on the ECU females, not too bad if you used to it lol, cos i cant find my econosel crimp die etc
(7 wires at the throttle only 5 at the ecu, 2 are doubled up at throttle end.) Did not spot that when i ordered the 7 core cable, could have used 5.
Pics might be useful to someone.

KISSMYAURA · Oct 26, 2022

more wavey daveys have arrived .....

KISSMYAURA · Oct 26, 2022

VDO Rev counter / taco install, very simple.
Single signal wire from ECU, my black connector had a blanking grommet at pin 19, so even easier to do.
Used gold plated econoseal connector, and used purple oversized wire fed through same flexi conduit i used for the throttle to ecu bypass, then staight up into binnacle.
45mins job done, worst part is fighting the rubber flooring stuff that keeps wapping you in the face!

KISSMYAURA · Oct 26, 2022

Up Next

Lof Powerspec SMF / HD Clutch kit ( fork release bearing etc)
Pioneer braided HD clutch lines
LR Clutch master and slave.
So will have all new hydraulic lines brakes and clutch, shorted!

KISSMYAURA · Nov 28, 2022

Offering up ...

haza88 · Nov 29, 2022

Don’t do it, your truck looks great with arches it has, that’s my personal opinion

Knappster · Dec 4, 2022

haza88 said:
Don’t do it, your truck looks great with arches it has, that’s my personal opinion

Agree. Unless you need to for the MoT, I wouldn’t. They look like wings in my opinion.

KISSMYAURA · Dec 4, 2022

Knappster said:
Agree. Unless you need to for the MoT, I wouldn’t. They look like wings in my opinion.

Nope its happening!

wilfranco · Dec 7, 2022

KISSMYAURA said:
Nope its happening!

I agree looks good as well as absolutely functional.
William

KISSMYAURA · Dec 7, 2022

wilfranco said:
I agree looks good as well as absolutely functional.
William

thanks all but its not up for debate or opinion, my truck my rules....

KISSMYAURA · Dec 7, 2022

Xmas holiday job list

Stainless Steel HD Sumo bars
Lemforder HD Greaseable track rod ends
Defender Drop arm conversion
OME Steering damper

KISSMYAURA · Dec 7, 2022

New Year

OME shocks
OME Springs
Central locking kit fit
NAS rear step
Raptor Coated Roof
Alive tune
Mid Cross member conversion
Seats

KISSMYAURA · Dec 22, 2022

KISSMYAURA said:
VDO Rev counter / taco install, very simple.
Single signal wire from ECU, my black connector had a blanking grommet at pin 19, so even easier to do.
Used gold plated econoseal connector, and used purple oversized wire fed through same flexi conduit i used for the throttle to ecu bypass, then staight up into binnacle.
45mins job done, worst part is fighting the rubber flooring stuff that keeps wapping you in the face!
View attachment 276855
View attachment 276849 View attachment 276850 View attachment 276851

KISSMYAURA · Dec 26, 2022

New Tacho...

KISSMYAURA · Jan 2, 2023

Dimmable LED dash illumination.

KISSMYAURA · Jan 3, 2023

KISSMYAURA · Jan 19, 2023

LOF Powerspec Clutch / Transfer Box new seals etc
I really wanted to do this myself, i have done everything else, and the only time anyone else touches it, its for an MOT inspection.
But alas i just don't have the lift yet, and my 3 slipped discs have conspired to say a resounding no way to axle stands and a engine hoist, so I am no longer in denial and have to accept it.
ho hum, ....

Huge thanks to Sam from Juice, cant recommend them enough.