Those fuse and relay boxes look familiar, I got two of them for my headlight relays, air horns, diesel fuel filter heater etc, very good bits of kit :)
 
New voltmeter and temp gauge.
IMG_6323.JPG
IMG_6329.JPG
IMG_6330.JPG
 
More test fitting for centre tray electrical distribution, conduit and master feeds. As the location from underside is high risk form water ingress will ptfe and silicone seal conduit glands for main battery box and centre tray.
Still more to do before final cable route, want to use the cub fuse / relay box to house relays and timers for :
  • Heated Screen & Mirrors
  • Heated Seats
  • Front light bars / spots
  • LED Load space lights / Side and rear flood-pool lights / Engine bay inspection lights
Managed to source some high amp thin sleeve cable, not cheap but great stuff very flexible.

IMG_6331.JPG
IMG_6332.JPG
IMG_6333.JPG
IMG_6339.JPG
 
Last edited:
More test fitting for centre tray electrical distribution, conduit and master feeds. As the location from underside is high risk form water ingress will ptfe and silicone seal conduit glands for main battery box and centre tray.
Still more to do before final cable route, want to use the cub fuse / relay box to house relays and timers for :
  • Heated Screen & Mirrors
  • Heated Seats
  • Front light bars / spots
  • LED Load space lights / Side and rear flood-pool lights / Engine bay inspection lights
Managed to source some high amp thin sleeve cable, not cheap but great stuff very flexible.

View attachment 170704 View attachment 170705 View attachment 170706 View attachment 170707

Perfect timing, I'm just planning my rear aux distribution set up, looking like a 35mmsq cable front to back and a distribution post to a fuseboard and then off to the accessories.

I'm not 100% on whether I should fit a relay board too?
 
Perfect timing, I'm just planning my rear aux distribution set up, looking like a 35mmsq cable front to back and a distribution post to a fuseboard and then off to the accessories.

I'm not 100% on whether I should fit a relay board too?
you might as well, depending on how many accessories you can use than as your fuse board......
 
you might as well, depending on how many accessories you can use than as your fuse board......

So far I'm looking at :-
1) on board air compressor system
2) aux hot air diesel heater for the cabin on cold drives/camping
3) stereo amp for better sound quality when I turn up the choones :cool:

I was thinking 35mm as it gives a massive reserve of power supply should I also fit rear andersons connectors for jumper cables?

Thoughts & comments appreciated.
 
So far I'm looking at :-
1) on board air compressor system
2) aux hot air diesel heater for the cabin on cold drives/camping
3) stereo amp for better sound quality when I turn up the choones :cool:

I was thinking 35mm as it gives a massive reserve of power supply should I also fit rear andersons connectors for jumper cables?

Thoughts & comments appreciated.
i fitted anderson connector under passenger seat, ideally should in an access box outside (trap door side entry)
 
Lost my best friend yesterday, Luna 13.5 years, she was in my arms looking into my eyes as the vet did what he had to do.
I am ****ing broken.

IMG_0631.JPG
 
The most heart breaking event I know, having lost so many over the years. I feel your pain and hope it will in time be supplanted by the many happy memories of your time with Luna.
 
Really sorry to hear about Luna. I had the same with my boxer some years ago. Think of the fun and happy times you had together and that she’s not suffering at all.
 

Similar threads