tom1979

Well-Known Member

Full Member

• Feb 21, 2019

• #1

Evening all, the rebuild continues and we have got the point of ordering more bits. The pistons in my engine are ERR7179, I am being told I cannot get piston rings for these and so must buy new pistons.

Is this correct? I find it hard to believe. Anyone had a similar experience?

 

sierrafery

Well-Known Member

• Feb 22, 2019

• #2

I dont know how the "pistons with keystone top ring" are, maybe somebody who knows more mechanics than me can enlight us, eventually ask these guys https://www.turnerengineering.co.uk/lft500040-piston-ring-set-c2x20634874

 

tom1979

Well-Known Member

Full Member

• Feb 22, 2019

• #3

sierrafery said:

I dont know how the "pistons with keystone top ring" are, maybe somebody who knows more mechanics than me can enlight us, eventually ask these guys https://www.turnerengineering.co.uk/lft500040-piston-ring-set-c2x20634874

Click to expand...

I did, they just want to sell me new pistons. Wouldn’t even look at the pistons I’ve got.

 

sierrafery

Well-Known Member

• Feb 22, 2019

• #4

Strangely the part number of the rings has results from other sellers as being compatible with all Td5 engines, e.g. https://www.island-4x4.co.uk/piston-rings-britpart-lft500040-p-1617.html

 

tom1979

Well-Known Member

Full Member

• Feb 22, 2019

• #5

Turners reckon they will fit but not seal. They were quite unhelpful and expected me to buy new pistons just to be on the safe side. At £450 for a set of pistons I’d rather try and get the right rings for them.

 

freelance

Well-Known Member

• Feb 22, 2019

• #6

Try your local engine reconditioners

 

O

ozzyboydeano

Well-Known Member

• Feb 23, 2019

• #7

tom1979 said:

Turners reckon they will fit but not seal. They were quite unhelpful and expected me to buy new pistons just to be on the safe side. At £450 for a set of pistons I’d rather try and get the right rings for them.

Click to expand...

if the bottom skirt or ring groove on the piston is worn change the piston

also remove the rings from piston and install rings inside the cylinder measure your ring gap you might not need new rings

piston ring groove if the ring is to loose and out of spec or the wrong ring used can cause piston to much ring twist (TORSIANAL TWIST ) this is why they recommend just replace the piston to be on the safe side as pistons do wear also and not just the rings

do you have any pics of the block and cross hatching condition ? and a rough estimate on the mileage

 

Last edited: Feb 23, 2019