the baron said:

Oven cleaner the petrol with a wag cleans up lovely The wife said if only i could clean the oven with such care

Click to expand...

dan1985 said:

After bypassing my EGR I noticed that the inlet manifold had about 10mm of sludge inside it. I have been looking at ways to clean it and came across some people using brake fluid.
I have also heard of people using brake fluid to de-coke the engine, by pouring it into the air intake or atomizing it with a spray gun.
Does anyone think the brake fluid can de-coke the engine and would they suggest using it on a TD4.
If I was to clean the Inlet manifold with brake fluid I i could leave some excess fluid in the manifold that should then be blown into the engine and de-coke it.

Click to expand...

cox325 said:

done mine last year, mr muscle, bottle brush and elbow grease.

The black carbon ****e that comes off will be lots, also make sure that you do not need to go in the house for anything, cos you'll only tread the said black **** all over the front room carpet. Blaming the 5 year old is no good, he doesnt have size 10 boots, it costs me a new carpet too, this **** doesnt come out of a red carpet.

Click to expand...

cox325 said:

done mine last year, mr muscle, bottle brush and elbow grease.

The black carbon ****e that comes off will be lots, also make sure that you do not need to go in the house for anything, cos you'll only tread the said black **** all over the front room carpet. Blaming the 5 year old is no good, he doesnt have size 10 boots, it costs me a new carpet too, this **** doesnt come out of a red carpet.

Click to expand...