T

TD4MES

New Member

• Jul 3, 2014

• #1

Morning all,
I got up early this morning to change the crank case breather valve on my td4 and I've managed to break one of the plastic T shaped connections on the fuel rail so I have diesel spraying out!
Does anybody know the part number for this?
Will a local lr garage have it?
Should I try to limp it to my nearest garage or is that very stupid?

 

Skinny Mike

Well-Known Member

• Jul 3, 2014

• #2

First off, check if its high or low pressure side. If its really spraying about 2 foot, its high pressure, if its running out its low.
Low pressure= leak off pipes
High pressure= problem

I would go to a diesel specialist for high pressure, fleabay for low.

A leak off connector is about £5. Not sure about the high pressure side.

Hope this helps.
Mike

 

Skinny Mike

Well-Known Member

• Jul 3, 2014

• #3

Its a Bosch system, that should narrow the search, or,

http://www.boschautoparts.co.uk/bdl/loc_search.asp?strLocator=Service

Mike

 

gstuart

D3 Grandad

Full Member

• Jul 3, 2014

• #4

http://www.landyzone.co.uk/lz/f9/td4-snapped-injector-fuel-t-piece-168600.html

 

T

TD4MES

New Member

• Jul 3, 2014

• #5

Thanks guys,

I called my local LR specialist and they told me it was the leak off pipes.
They've ordered me a new set £24.50. I'll pick them up tomorrow.

Thanks for the links! Useful info about the clips!
I'm told that they are £13 each!!!!