S

Sw19Lisa

New Member

• Oct 28, 2013

• #1

Can anyone help me please?
My 2002 Disco has been in two garages for three weeks now.
Had 2 new wheel sensors as advised with diagnostic tool, but now the garage are at a loss to know why the TC light comes on when you pull away.
Any ideas would be a great help , being disabled I need my vehicle back.
Many thanks

 

SteNova

Well-Known Member

• Oct 28, 2013

• #2

What was the original fault?

 

ShayneJ

Active Member

• Oct 28, 2013

• #3

corroded hall rings causing intermittent signal?

 

darius

Active Member

• Oct 28, 2013

• #4

Sw19Lisa said:

Can anyone help me please?
My 2002 Disco has been in two garages for three weeks now.
Had 2 new wheel sensors as advised with diagnostic tool, but now the garage are at a loss to know why the TC light comes on when you pull away.
Any ideas would be a great help , being disabled I need my vehicle back.
Many thanks

Click to expand...

Well done at introducing yourself

Do the lights actually stop the vehicle operating? I have read many threads about the Disco electrics playing havoc.

 

thought it was mine!

New Member

• Oct 28, 2013

• #5

ShayneJ said:

corroded hall rings causing intermittent signal?

Click to expand...

+1 or cracked mate has same prob with his 405

 

DIFFLOCK66

Well-Known Member

• Oct 28, 2013

• #6

Are the hall rings part of the hub assemblies? If so, could the diagnostics not say which one(s) and then have them replaced?

 

Spunka

New Member

• Oct 29, 2013

• #7

if you say where abouts you are folk may tell you of a decent garage to take it to (with proper dynastics)

 

ShayneJ

Active Member

• Oct 29, 2013

• #8

DIFFLOCK66 said:

Are the hall rings part of the hub assemblies? If so, could the diagnostics not say which one(s) and then have them replaced?

Click to expand...

they are the toothed rings the sensors look at i think they are
part of or attached to the CV joints within the hubs.

 

Spunka

New Member

• Oct 29, 2013

• #9

TC works off the ABS sensors and rings , if there is an ABS fault it turns off the TC. If there is a prob with the rings the ABS light would come on or at least register a fault code

You need some one with proper test gear
The TC system may need resetting if the program allows, sound like the sudden increase in speed is turning it on


Thats wot I think anway