Andy Burrell

Andy Burrell

Retired to the country
As some of you will know I have had a long standing issue with the battery going flat for no obvious reason and then recently had the EAS pump have a catastrophic failure when it totally destroyed itself internally. Well it seems the two problems were related as since fitting the replacement pump the battery hasn't gone flat. It hasn't been on the Ctek for about two weeks and has started on the button every day through the freezing weather.
Probably put the mockers on it now by posting but thought an update was due.

Happy Christmas one and all :D
 
Andy Burrell said:
As some of you will know I have had a long standing issue with the battery going flat for no obvious reason and then recently had the EAS pump have a catastrophic failure when it totally destroyed itself internally. Well it seems the two problems were related as since fitting the replacement pump the battery hasn't gone flat. It hasn't been on the Ctek for about two weeks and has started on the button every day through the freezing weather.
Probably put the mockers on it now by posting but thought an update was due.

Happy Christmas one and all :D
Click to expand...

Well thats a new one to add to the list of possible battery drain and not one that stands out.
 
Andy Burrell said:
As some of you will know I have had a long standing issue with the battery going flat for no obvious reason and then recently had the EAS pump have a catastrophic failure when it totally destroyed itself internally. Well it seems the two problems were related as since fitting the replacement pump the battery hasn't gone flat. It hasn't been on the Ctek for about two weeks and has started on the button every day through the freezing weather.
Probably put the mockers on it now by posting but thought an update was due.

Happy Christmas one and all :D
Click to expand...

Weird. The EAS should sleep so somehow it must have kept waking it up. There're only 3 wires to the compressor. It must have been something in the top of the pump, possibly thermal switch almost fried?
 
Grrrrrr said:
Weird. The EAS should sleep so somehow it must have kept waking it up. There're only 3 wires to the compressor. It must have been something in the top of the pump, possibly thermal switch almost fried?
Click to expand...
Yep thermal switch had melted and disintegrated taking the brushes out and the the whole thing just burnt out. The awful smell of burnt motor windings was in my workshop for ages after.
Have pictures but it says I don't have permission to upload them :confused:
 
Andy Burrell said:
Yep thermal switch had melted and disintegrated taking the brushes out and the the whole thing just burnt out. The awful smell of burnt motor windings was in my workshop for ages after.
Have pictures but it says I don't have permission to upload them :confused:
Click to expand...

Think you have to reduce the size to less than 1MB.
 
I have been able to copy and paste on my desktop PC but not from my Samsung S22+ although I only tried that once when posting recently became a problem. Consequently if I take a photo with the phone I have to email it to myself to get it on the PC for posting. A bit of a nuisance for sure.
 
Grrrrrr said:
Weird. The EAS should sleep so somehow it must have kept waking it up. There're only 3 wires to the compressor. It must have been something in the top of the pump, possibly thermal switch almost fried?
Click to expand...
The EAS wakes up about every 6 hours.
 
You must log in or register to reply here.

Similar threads

MikeFl4
P38A ABS faults and codes
Replies
17
Views
3K
MikeFl4
MikeFl4
Blob
L322 Fixed (Sort of) - Every single module in fault. Where to start?
3 4 5
Replies
81
Views
12K
Mark Piercy
Mark Piercy
Blob
L322 (Not your usual) battery drain
Replies
7
Views
2K
Datatek
Datatek
Skyisthelimit
No impulse on Discovery 1 1991 model V8 3.5 right hand drive.
Replies
12
Views
830
classic kev
classic kev
AMD74
TD5 poor starter when cold and blue smoke
Replies
4
Views
833
AMD74
AMD74