S

sprie

Active Member

• Dec 6, 2023

• #1

I have bought some 250693 bolts which from my parts list should be the right bolts to fit on the bracket which holds that big seal that goes over the swivel housing. but they don't fit.
i can't find any bolts that do fit in my collection.
I have cleaned out any muck from the holes, and the threads look in good condition. It feels like i could force my 250693 in the threads, but I am pretty sure they are not the right bolts. i have tried a number of the holes and it feels the same on all of them.
Can anyone point me in the right direction for which bolts (size, thread etc) are the right ones or am i missing something?
thanks

 

Attachments

• 
  20231206_151923.jpg

  244.9 KB · Views: 94

boguing

Well-Known Member

Full Member

• Dec 6, 2023

• #2

What age is the car? They can be 1/4" or 6mm. At 1980 mine's a challenging mix.

 

Turboman

Mab An Gov

• Dec 6, 2023

• #3

boguing said:

What age is the car? They can be 1/4" or 6mm. At 1980 mine's a challenging mix.

Click to expand...

Wouldn't surprise me if even older vehicles had Whit bolts on those, which I think had UNF threads.

 

boguing

Well-Known Member

Full Member

• Dec 6, 2023

• #4

Turboman said:

Wouldn't surprise me if even older vehicles had Whit bolts on those, which I think had UNF threads.

Click to expand...

Yes, I'm pretty sure they're UNF (if not metric) just didn't want to put it in writing!

 

Turboman

Mab An Gov

• Dec 6, 2023

• #5

boguing said:

Yes, I'm pretty sure they're UNF (if not metric) just didn't want to put it in writing!

Click to expand...

Careless talk costs Lives!

But what I was getting round to was that this is the likely cause of the difficulty OP has in screwing in the bolts. Metric Threads in a UNF Hole, so to speak.

 

boguing

Well-Known Member

Full Member

• Dec 6, 2023

• #6

SH106121L are the metric screws.

 

mystery

Well-Known Member

• Dec 6, 2023

• #7

try 1/4 BSF thread

 

S

sprie

Active Member

• Dec 9, 2023

• #8

thanks for the responses. they got me thinking and i worked out that the front axle may not be original. I retested the hole and worked out it was 6mm i.e. metric. All good. Many thanks for the help.