Mark L

Well-Known Member

• Sep 8, 2014

• #21

The part number for the swivel ball I used was FRC7065R.

 

jamesmartin

Well-Known Member

• Sep 8, 2014

• #22

Mark L said:

The part number for the swivel ball I used was FRC7065R.

Click to expand...

sounds like a bearmach pattern part ,probably the same source as other pattern parts ,there wont be many factories producing them

 

Mark L

Well-Known Member

• Sep 8, 2014

• #23

I noticed one particular company on the net has since superceded that part number with another.

 

Last edited: Sep 8, 2014

jamesmartin

Well-Known Member

• Sep 8, 2014

• #24

ftc5366 and tir100000 are superceded numbers

 

AlbertDefender90

Active Member

• Sep 8, 2014

• #25

Got my britpart ones from paddocks several years ago, no problems other than failed bearings cos I set the preload wrong. 10k miles and their still good so I'm reusing them on my rebuild regardless of the scare stories

 

Scratchnskid

New Member

• Sep 9, 2014

• #26

I'm on a Teflon BP OEM spec swivel no issues on my 110, 3 years of regular greenlaning and a coast to Coast run across the Pyrenees fully loaded. My other swivel is the factory chrome dome and is still going strong but just starting to pit a little now after 16years of hardwork