thought it was mine!
New Member
motor rusted and seized. had it on mine took apart cleaned and put back there is a thread on here about it. tkaes all of 20 minutes
Hi - thanks, but both aren't working though, seems odd that both not working ?
Vanmancan
Active Member
Both mine stopped working at the same time too. If not used regular . They rust and seize up ,as said above , very easy to clean and fix. Just check see if ya got power at the motor .
sabredylan
New Member
Check settings in BCU also. I stripped my fuse box due to oil in it, and on powering back up it thought it was a v8 manual instead of a td5 auto.
discool
Well-Known Member
Is there any more info to come?
Have you tried open to opening them manually?
Hi - how do you open them manually ? can't see anywhere where this is done, unless you have to take the trim apart ?
sabredylan
New Member
Unscrew the 8 or so screws on the trim above the drivers head and expose the motor. Check its getting a voltage. If voltage present remove motor, open it up, clean an re grease. You may have got some water in. Removing the trim also exposes the sunroof ecu for check or replacement. Its only a 20 minute job.
For info both mine appeared dead. Cleaned as per above and both now work. You'll have to drop rear headlining for the back motor, so check front first.
For info both mine appeared dead. Cleaned as per above and both now work. You'll have to drop rear headlining for the back motor, so check front first.
Thanks for the heads up will try that :clap2:
