badlad

Active Member
Hi. Currently have a 2012 SD4 which is missing its sump guard. Being a bit OCD I am trying to source one for it. I have seem some adverts which would suggest the the 2006-2011 have a different sump guard to mine. Any of you knowledgeable folks confirm this. Hate to have to return one due to is size
 
I don't believe the subframe changed, so presumably the guard is the same. The front bumper is slightly different, but there's another piece of plastic between the bumper shell and sump guard.
Don't forget that you'll need 6 X M10 flange head bolts to secure it, this is assuming the captive nuts are still in place.
 
I don't believe the subframe changed, so presumably the guard is the same. The front bumper is slightly different, but there's another piece of plastic between the bumper shell and sump guard.
Don't forget that you'll need 6 X M10 flange head bolts to secure it, this is assuming the captive nuts are still in place.
Many thanks Bud. Was looking at this one. Looks good enough as i wont be doing any hard off roading.

 
Many thanks Bud. Was looking at this one. Looks good enough as i wont be doing any hard off roading.

Careful - that listing carries an import duty also…
 
Hi. Noticed that. Might get it sent to Depot in South Ireland and pick it up next time I'm down lol
 
Sump guard.
RV21piil.jpg
1

GJzV7NPl.jpg
2


ask if they will just sell you the sump guard and bolts.
 

Similar threads