gemsdad
NOT BOTHERED.
think it is called the Railko bush.
Railko bushPart Number: FRC2916
- Quality Aftermarket
- Defender
- Aftermarket
- Stock Item - usually ready for despatch
Paddocks
Last edited:
Interceptorxj
Well-Known Member
From Ashcrofts website:
After a long run in my Discovery, when the gearbox gets hot, the gear lever becomes stiff when moving from side to side. Why?
The nylon cage at the end of the selector rail can swell when hot, and cause friction. To rectify this, the parts needs replacing. You can find this part here
After a long run in my Discovery, when the gearbox gets hot, the gear lever becomes stiff when moving from side to side. Why?
The nylon cage at the end of the selector rail can swell when hot, and cause friction. To rectify this, the parts needs replacing. You can find this part here
forkliftfred
Member
I recently changed the oil in mine and refilled with the correct type MTF. I wasn't really expecting any change but the difference in gear changes is great. Much smoother and quieter. I always had trouble selecting first, now drops in without effort.
meego
Well-Known Member
I have the correct genuine oil in the gearbox. My Disco has only done just over 100k and the oil has been changed twice. It does freshen up the gear change though.
meego
Well-Known Member
Landmark2
Well-Known Member
http://new.lrcat.com/#!/1232/38569/38570/2977 Lower bush
http://new.lrcat.com/#!/1232/38569/38570/2971 Upper bush
Griff
http://new.lrcat.com/#!/1232/38569/38570/2971 Upper bush
Griff
