micmav · Jun 18, 2018

Have bought an old man emu steering Damper for my defender 90,having trouble getting the pivot end into the drop arm. It looks like it has been pinched together when old one fitted.old one comes out ok but new one won't fit. Not sure how much force I can use to widen it.

Oldseadog · Jun 19, 2018

Could it be that the rubber bushes were worn on the old one and that's why the new end is tight?

micmav · Jun 20, 2018

Oldseadog said:
Could it be that the rubber bushes were worn on the old one and that's why the new end is tight?

it's the metal insert that sits just proud of the bushes in the pivot end that's preventing it slotting in.

I

dag019 · Jun 21, 2018

I know that it is a cast piece but it is possible to very carefully spread the mount a little while you slot it in. Although if it is the metal insert in the bush, if it is a poly bush, it may be worth carefully filling down the centre a little or even just replacing the bush.

micmav · Jun 24, 2018

dag019 said:
I know that it is a cast piece but it is possible to very carefully spread the mount a little while you slot it in. Although if it is the metal insert in the bush, if it is a poly bush, it may be worth carefully filling down the centre a little or even just replacing the bush.

Thanks for the advice, filed the insert down a little and also gently opened up the drop arm.

micmav

Member

Oldseadog

Well-Known Member

micmav

Member

dag019

Well-Known Member

micmav

Member

Similar threads