ohgoon2006

New Member
hey guys i have been trying to fit some 19inch sport rims to me p38 vogue and after all the agro getting the car jacked up i soon realised that the wheel nuts were to big for the new wheels ( i knew i should have checked first)
please guys can you advise me wot size i need to fit and where i can get them from ? i have tried all my local stockists and no joy and its sat so i have a car on jack stands arghh !!
please if you can help that would be super
 
you will need the nuts for a l322 range rover dealer or ebay only you may need some spigot adptors too as the wheel centers are bigger on the latter cars.
 
R Plate P38 - I have a set of Sports Ally Wheels with special nuts for the RR - but I think that they came from a Disco 2 - problem is they don't center on the car, hence it runs like a "Circus Noddy Car", grabs your hand off the Steering Wheel at around 50 or on overrun. Any ideas mates for the 4.6HSE Autobiography (fitted both new front track rods & ends , steering box, alignment, wheel balance & front diff) - Help!
 
what tyers do you have on this can create problems tyer press have you tried changing wheels from frount to back
 

Similar threads