NikTheGeek

NikTheGeek

New Member
help
radiator has gone in a cloud of steam
where is a good place to supply and fit near Bridport or Dorchester?

tnx
Nik
 
How about:

Camberly Autofactors, Bournemouth
Unit 4, Dominion Centre
Elliott Road
Bournemouth BH11 8JR
t: 01202 651100
f: 01202 591145

Supply only but they may have one in stock, yer never know!
 
Local Indy....

Bournemouth Land Rover Ltd
Unit 7 Cortry Close
Branksome, Poole, Dorset
BH12 4BQ

Tel: 01202 280205

Mob: 07525 208450
 
Got any tools with you to fit it yourself? Island 4x4 do next day delivery.
Good luck matey.
 
I'm sure you're a member of a recovery company (AA, etc)? If this was me, I'd call them, get the car recovered home and use their replacement hire car service. Then I'd enjoy the rest of my holiday and forget about it till I got home :)
 
If it's plastic the impeller can be practically non-existant or not spinning meaning the flow is vastly slowed. Better to change to a metal version. :)
 
Thought there was a connection.
Rad doesn't need to come out to do impellor does it? If not I'll do it myself when i get home

Been recovered and its on its way to Als who has already ordered the rad and will turn it round in the day. I might ask about the impellor...

Tnx all
Only a day ruined. Could be a lot worse!! :)
 
NikTheGeek said:
Why? Just out of interest?
Click to expand...

Unless you have replaced it recently then no
But for the sake of few bolts while the rad is out wont do any harm that's the good thing about oring gaskets you can inspect and replace if the rubber isn't perished from old age unlike the paper type.
Did you not see the last water pump that was knackerd on the blown radiator thread.
 
NikTheGeek said:
Thought there was a connection.
Rad doesn't need to come out to do impellor does it? If not I'll do it myself when i get home

Been recovered and its on its way to Als who has already ordered the rad and will turn it round in the day. I might ask about the impellor...

Tnx all
Only a day ruined. Could be a lot worse!! :)
Click to expand...
Glad I could help Andy is a good chap
 
Nik,
there are a few guys in that part of the world with Fenders and Discos so if you can get a rad but not fitting it might be worth asking one of the LZIR guys if they could raise some help for you.
 
You are lucky just being in Dorset My radiator split when I was in Kazakhstan and had to get someone to make up an aluminium top tank for it.
 
martynv8 said:
If it's plastic the impeller can be practically non-existant or not spinning meaning the flow is vastly slowed. Better to change to a metal version. :)
Click to expand...

+1 Deffo

even if it looks ok Change it!! mine looked perfect but you could turn the plastic on the shaft!!


Changed rad, stat (twice as bought cheap one first time) and pump. Since then I've driven to Belgium and back :crazy_driver:
 
You must log in or register to reply here.

Similar threads

enjoi
P38A Going through radiators- not overheating
2 3 4
Replies
60
Views
4K
enjoi
enjoi
dag019
Radiator options
Replies
19
Views
1K
Bobsticle
Bobsticle
JT_spark
P38 DSE Auto intermittent lack of power after vehicle has been hot
Replies
8
Views
552
brianp38dse
brianp38dse
S
3.9EFi in Lotus is overheating very quickly
Replies
6
Views
773
springwood
S
G
TD5 clutch fitting price
Replies
19
Views
624
miktdish
miktdish