M

Muffin_Man

Member

• Jul 1, 2020

• #1

Evening all,

Quick question - the clutch has just been done on my Td5 disco... The first proper run was today - around 200 miles.

However, I've already got the typical squealing / groaning sounds from when slipping clutch in reverse / first.. I'm thinking spigot Bush?

I don't know if it was changed allong with the clutch - it was done just before I brought it!

What're people's thoughts on this? Am I risking doing any damage if I leave this?

Or should I bite the bullet and drop the gearbox out just to take care of the damned Bush?

Many thanks!

 

sierrafery

Well-Known Member

• Jul 1, 2020

• #2

If it's the spigot bush(seems so based on the symptom) and not something else then no other issues than the annoying noise... remember next time to not miss it when the gearbox is removed

 

F

Fartfield

New Member

• Jul 1, 2020

• #3

Mine`s been making that noise for the last three years, doesn`t seem to be getting any worse.

 

T

tilly2

Well-Known Member

• Jul 1, 2020

• #4

Just as a guide. How much did you pay for the clutch to be replaced. Need mine doing and am looking at options, including doing it myself...

Did you have the same noise prior to the clutch being done ? It does sound like a spigot bush though...

 

jamesmartin

Well-Known Member

• Jul 1, 2020

• #5

it wont cause any harm,chances are if theyve fitted a new one its too tight

 

T

tilly2

Well-Known Member

• Jul 1, 2020

• #6

jamesmartin said:

it wont cause any harm,chances are if theyve fitted a new one its too tight

Click to expand...

Possibly they failed to soak it in oil, or its got a burr from being installed...

 

jamesmartin

Well-Known Member

• Jul 1, 2020

• #7

tilly2 said:

Possibly they failed to soak it in oil, or its got a burr from being installed...

Click to expand...

you dont need to soak the bushes nowadays, unlike all the other engines that bush fits its only td5 were it can be an issue

 

M

Muffin_Man

Member

• Jul 10, 2020

• #8

jamesmartin said:

it wont cause any harm,chances are if theyve fitted a new one its too tight

Click to expand...

Oddly, it seems to have got worse over the last week or so... The noise is there anytime I go near the clutch in any gear.

Ive heard about them needing to be reamed sometimes... I suppose it'll be unlikey to 'bed in' with time?

If not, I reckon I'll have to do it soon - pretty embarrassing when everyone in the vicinity turns their head round as you pull off!

 

M

Muffin_Man

Member

• Jul 10, 2020

• #9

tilly2 said:

Just as a guide. How much did you pay for the clutch to be replaced. Need mine doing and am looking at options, including doing it myself...

Did you have the same noise prior to the clutch being done ? It does sound like a spigot bush though...

Click to expand...

Sorry mate, was done just before I brought the truck! Someone I know just had their clutch done on a td5 defender, think he paid around £1400 in total with parts and a couple of leaky seals being sorted etc...