aaronmorris
Head's a shed
+1. It'd be on the floor in a big heap before I know it.
aaronmorris
Head's a shed
So two nights worth of updates in one hit here
Masked off the open areas to stop the outside paint going in
Two coats of primer
Then tonight was a quick wet and dry sand down then the top coat. First light mist coat
Second light mist
Third
Wet coat number one
Then after the second wet coat, how it stands currently, I have not bothered with the roof as that is going black
Masked off the open areas to stop the outside paint going in
Two coats of primer
Then tonight was a quick wet and dry sand down then the top coat. First light mist coat
Second light mist
Third
Wet coat number one
Then after the second wet coat, how it stands currently, I have not bothered with the roof as that is going black
Got a reasonable amount done tonight, first up was the roof, masked off
Usual light mist coats
followed by wet coats
Job done
Painted some of the details black as they are on my 1:1 hinges etc
Made up the two headlight plastic surrounds
Drilled two holes for the 3mm sidelight LEDs
Stuck the surrounds on
Tinted the rear windows
Then set about the arches of which I have finished 2 of the 4, started off with the fine line masking tape
then normal masking tape
Sprayed up
Usual light mist coats
followed by wet coats
Job done
Painted some of the details black as they are on my 1:1 hinges etc
Made up the two headlight plastic surrounds
Drilled two holes for the 3mm sidelight LEDs
Stuck the surrounds on
Tinted the rear windows
Then set about the arches of which I have finished 2 of the 4, started off with the fine line masking tape
then normal masking tape
Sprayed up
I only noticed when i turned the main gear and the front and back wheel hubs turned in opposite directions!
Please post a detailed shot of the underside of the front axle, the servo arm and connection to the steering. The supplied steering servo of mine has a very crappy looking arm, and I'm not happy with the way it connects.
Thanks.
Please post a detailed shot of the underside of the front axle, the servo arm and connection to the steering. The supplied steering servo of mine has a very crappy looking arm, and I'm not happy with the way it connects.
Thanks.
