XPETEX

New Member
Hi,
This is my first post on here,
im running a landy 90 with a 200TDI engine dropped in with almost 300,000 miles on the clock. when running the brake pedal feels fine but when you turn it off it goes hard is this usual?
cheers Pete
 
yeah I know that bit, normally the pedal should go hard on every vehicle if you pump it but on myn when you turn it off the pedal goes solid straight away, then once started drops to where it normally sits just seems a bit odd
 
Check the non return valve in the rubber hose from vac pump to servo, i think its built into the 90 degree fitting servo end.



Lynall
 

Similar threads