awkwardbob
Well-Known Member
awkwardbob
Well-Known Member
Ah, copy and paste worked (I used to just use the ‘upload a file’ button but that’s stopped working.
you can see on the pics where the blooming desk won’t stay on, it’s far from
Snug
.
I’m still super confused about what bit of the metalwork is supposed to be bent -is there a flange behind the face ?
any pictures would be really helpful.
thanks again
Bob
you can see on the pics where the blooming desk won’t stay on, it’s far from
Snug
.I’m still super confused about what bit of the metalwork is supposed to be bent -is there a flange behind the face ?
any pictures would be really helpful.
thanks again
Bob
brianp38dse
Well-Known Member
I would pull the seal off and shut the tailgate and see which part of the flange has the biggest gap to tailgate and adjust that part.
awkwardbob
Well-Known Member
Thanks… I’m still really not sure what I should be doing and Rave isn’t much clearer imho !
I think I have 3 areas of concern:
boot seal
-clearly not fitting
Sunroof
-not flush -high at front, low at rear, possible seals / adjustment / drains
heater matrix
-leaky o-rings drivers footwell soggy with coolant
if I can just get her watertight, I can deal with the more ‘mechanical’ and cosmetic bits…
I think I have 3 areas of concern:
boot seal
-clearly not fitting
Sunroof
-not flush -high at front, low at rear, possible seals / adjustment / drains
heater matrix
-leaky o-rings drivers footwell soggy with coolant
if I can just get her watertight, I can deal with the more ‘mechanical’ and cosmetic bits…
awkwardbob
Well-Known Member
Well, I’m finally getting some time to get round to this have new seals for boot and I managed to get a new genuine sunroof seal in the US.
Will update once I actually manage to achieve something !
Will update once I actually manage to achieve something !
Henry_b
Think outside, no box required.
Just a word or warning the lip that holds the sunroof seal can corrode beyond recognition, which itself can cause a leak usually the front corners of the headliner get wet and start dripping!
If yours is still sound a coat of paint would prolong its life before fitting the new seal..
If yours is still sound a coat of paint would prolong its life before fitting the new seal..
awkwardbob
Well-Known Member
Just a word or warning the lip that holds the sunroof seal can corrode beyond recognition, which itself can cause a leak usually the front corners of the headliner get wet and start dripping!
If yours is still sound a coat of paint would prolong its life before fitting the new seal..
Sounds like a good idea !
How did you find fitting the new seal ? I hear it can be a pain
Henry_b
Think outside, no box required.
You need to remove the sunroof glass..
Not hard really put the sunroof on tilt and its just 4 bolts, hidden behind some plastic trim "usually" on either side of the sunroof glass
Thought you could get tablets for a mouldy willyOnly just seen this. You really don't want a mouldy willy
Thought thats why you wore tenna'sFink that's for leaky ones
too tight.. maybe fiversThought thats why you wore tenna's
pervertBlow the expense I use twenni's
When one drives a Range Rover one has to keep up appearances doesn't one. Even if one is always blooming skint with owning the Range Rover
cornishboater
Well-Known Member
Aint that the goshdarn truth!When one drives a Range Rover one has to keep up appearances doesn't one. Even if one is always blooming skint with owning the Range Rover
