With my 90, the rear nearside suspension is about 1-5 inches low, plus the front offside suspension is about 1-5 high, could this be because the low rear is cocking up the front offside, and by renewing, as you say, ( in pairs ), both rears, could this level the 90 up, all round.
Or, I have seen the Britpart 2 inch lift, light load setup, could this be a better allround option...
Thanks all, for info so far,, Oh, A HAPPY NEW YEAR TO YOU ALL.
cooltide
sheep fancier
Finding it hard to disagree with cock up theory. The axles don't just float there, and movement / shock is being transferred through radius arm / trailing arm bushes and top mounts into the chassis. you may probably add in mismatched spring ratings and damping.
In my opinion which others may dispute:
Adding 2" may counter what you are trying to achieve. It will increase body roll, especially on a light setup. (Not owned a 90 since the 90s but don't remember having anti roll bars) It will increase noise from the propshaft ujs. It will increase pressure on suspension arm bushes. If I wanted to lift (and I probably wouldn't in a capable by design 90) , I would consider +1" as well as rock sliders etc as a happy medium. I wouldn't choose britpart either. You get what you pay for.
In my opinion which others may dispute:
Adding 2" may counter what you are trying to achieve. It will increase body roll, especially on a light setup. (Not owned a 90 since the 90s but don't remember having anti roll bars) It will increase noise from the propshaft ujs. It will increase pressure on suspension arm bushes. If I wanted to lift (and I probably wouldn't in a capable by design 90) , I would consider +1" as well as rock sliders etc as a happy medium. I wouldn't choose britpart either. You get what you pay for.
Hi , NO, the steering feels o/k for an 87, 90. Its just the look of the vehicle when standing parked up, there is a definite low point at the rear nearside corner, I have taken various measurements, and its pointing to possibly a weak spring, or shock, OR both.
I think that with the 245 x 75 x 16 tyres on, the 90 looks good, except for the noticeably low rear corner.
After looking though the very extensive history that came with the 90, I have found that some years ago, one spring, and shock, was fitted, but the invoice shows no position it was fitted at.
SO, should I fit new all round, OR renew just the rear springs and shocks, ADVICE PLEASE, from you very nice,( lick, lick
) people out there.Thanks for your reply Cooltide, ill go for renewing the rears first, see if that straightens up the rear nearside leaning.
Regarding your marital strain, mines ok, so long as its only me landrover I play with
regards Leemar
Last edited:
