P38_Ireland
Well-Known Member
now thats looking swish! how long off till its ready for a test drive?
SpiggyTopes
Active Member
Hi,
Great project!
Please let me know where you got the heat reflective sheet and tape.
Cheers.
dunkan
Active Member
Cheers i'd have thought in the N/Y
thanks Henry
Cheers Geoff
Got the self adhesive sheet from Demon Tweeks but it's just not sticky enough for my application
so i haven't used it or the roll of tape.
We're going to wrap the cats instead with a sheet of very similar material that you lock wire in
place or use metal cable ties. Got that from Holden vintage & classic
A lot of places sell these products inc good old ebay but i prefer to buy from known suppliers
www,merlinmotorsport.co.uk
www.holden.co.uk
Last edited:
SpiggyTopes
Active Member
Many thanks for the info
dunkan
Active Member
No problem Spiggy, i'd imagine if you used some good contact adhesive then any of this sheet could be stuck in place and also help the sticky sheet to stick
The sheet and tape i have is www.thermotec.com
The sheet and tape i have is www.thermotec.com
Last edited:
ukadamwest
Well-Known Member
Sod the heat tape.... i want to know who the girl is on holden's website..
stutab
Well-Known Member
Flat chest as wellLooks a bit moody to me, could be a right handful
on the bones
pete1987RRC
Well-Known Member
Odd shape nose if you ask me
We do a heat reflective tape if your lookin.......send me a PM 😀😀
ukadamwest
Well-Known Member
ahh the crazy ones are usually the best in the sack..
as for skinny.. i was going to say i prefer built for speed not for comfort.. but then i realized.. i have a range rover (or two) - i still prefer a girl built for speed not for comfort though !
dunkan
Active Member
dunkan
Active Member
Cheers Pete, i'll bear that in mind if i need any more
dunkan
Active Member
The chassis is almost finished, fuel lines are done just need to fit the heat wrap to the cats, started sorting out the loom and painting the floor in the shell now
Attachments
Last edited:
dunkan
Active Member
Cats are wrapped and the wiring loom has been cleaned, re taped and is pretty much back
where it should be.
The new body mount bushes/bolts are lubed up ready for it to go back on the chassis.
Apologies for the crap photos they're off my phone, i'll update with better ones off my
camera
where it should be.
The new body mount bushes/bolts are lubed up ready for it to go back on the chassis.
Apologies for the crap photos they're off my phone, i'll update with better ones off my
camera
Attachments
-
Range Rover wiring going back into shell 024.jpg -
Range Rover wiring going back into shell 027.jpg -
Range Rover wiring going back into shell 025.jpg -
Range Rover wiring going back into shell 019.jpg -
Range Rover wiring going back into shell 009.jpg -
Range Rover wiring going back into shell 005.jpg -
Range Rover wiring going back into shell 017.jpg -
Range Rover wiring going back into shell 004.jpg -
Range Rover wiring going back into shell 003.jpg
Last edited:
dunkan
Active Member
The body and chassis are back together
Attachments
-
Range Rover body back on chassis 014.jpg -
Range Rover body back on chassis 009.jpg -
Range Rover body back on chassis 018.jpg -
Range Rover body back on chassis 012.jpg -
Range Rover body back on chassis 001.jpg -
Range Rover body back on chassis 025.jpg -
Range Rover body back on chassis 004.jpg -
Range Rover body back on chassis 023.jpg
