That wading kit is all you need really, its nice and straight forward to do as well, I attached mine to the end of the current breathers after check the exsisting pipework for any wear.

I know a similar one has already been posted but this was my solution to an ABS snorkel with secondary battery fitted:

545684_10150803946382374_730587373_9733492_16996146_n.jpg
 
Managed to test the snorkel and breather kit at the weekend, as went on the Extreme off road course at the Bath & West showground - worked really well, so chuffed with my work :D
 
Well, finally got round to sorting out my air box, given the lack of room with fitting the second battery.

So got a forced cold air filter (as couldn't find any decent 200 air boxes) and went from this...

normal_IMAG0291.jpg


to this.....

normal_IMAG0298.jpg


normal_0301.jpg


Just need to get some steel tubing now to make the 'snorkel' part, and jobs a good one :D

Is this hose the same diameter as the southdown? 63mm?
 
I am not sure as never used that tube in the end, went to some 60 mm internal diameter ply as thats the size of the pipe i used (some spare after i did an exhaust) so never used the southdown part...just the mould on the wing.
 
This is the setup I now have...

normal_IMAG0371.jpg


Just had a look in my garage to see if I still had the old pipe, but can't see it, so will whip off the one that's on at the weekend and measure up the sizes for you.
 
Well, since I had the filter part to bits, thought I would tidy up the piping, so I went from this....

normal_0301.jpg


to being properly plumbed into the snorkel in the wing....

normal_IMAG0371.jpg


to this.....

normal_20131214_154720.jpg


:D
 
whats on the end of it going towards the turbo? i don't have that on mine going to the turbo? is it to do with the auto? mines manual you see..
 
whats on the end of it going towards the turbo? i don't have that on mine going to the turbo? is it to do with the auto? mines manual you see..

Hi PS, that's a Mass Air Flow meter (MAF) and no, you don't have one on a manual gearbox TDi 300.


Dave
 

Similar threads