Rafe Dent Member May 27, 2011 #1 Found a small (6-7mm?) neat round hole on right hand vertical side of airbox. Sort of in centre of where air filter sits (internally). It's empty and 'fluttering' on tick-over. Can't be right surely? Any thoughts? Thanks, R PS FL1 TD4, 2004, 92K km. Last edited: May 27, 2011
Found a small (6-7mm?) neat round hole on right hand vertical side of airbox. Sort of in centre of where air filter sits (internally). It's empty and 'fluttering' on tick-over. Can't be right surely? Any thoughts? Thanks, R PS FL1 TD4, 2004, 92K km.
2.0_hippo Well-Known Member May 27, 2011 #2 Sounds like previous owner has fitted a synergy 2 The hole was probably for the air sensor on the synergy
Sounds like previous owner has fitted a synergy 2 The hole was probably for the air sensor on the synergy
angeloc Well-Known Member May 27, 2011 #3 2.0_hippo said: Sounds like previous owner has fitted a synergy 2 The hole was probably for the air sensor on the synergy Click to expand... Air sensor? What air sensor on synergy 2?
2.0_hippo said: Sounds like previous owner has fitted a synergy 2 The hole was probably for the air sensor on the synergy Click to expand... Air sensor? What air sensor on synergy 2?
Chaser New Member May 27, 2011 #5 The hole in the end of the air filter housing was used on early Td4s to secure a clip that held a heater hose to the end of the housing.
The hole in the end of the air filter housing was used on early Td4s to secure a clip that held a heater hose to the end of the housing.
2.0_hippo Well-Known Member May 27, 2011 #8 angeloc said: Air sensor? What air sensor on synergy 2? Click to expand... on my synergy 2 there is a seperate air temp sensor that goes into the air intake i think this was later eliminated on later synergys
angeloc said: Air sensor? What air sensor on synergy 2? Click to expand... on my synergy 2 there is a seperate air temp sensor that goes into the air intake i think this was later eliminated on later synergys
angeloc Well-Known Member May 27, 2011 #9 2.0_hippo said: on my synergy 2 there is a seperate air temp sensor that goes into the air intake i think this was later eliminated on later synergys Click to expand... Right mine has just the rail and the MAF plugs
2.0_hippo said: on my synergy 2 there is a seperate air temp sensor that goes into the air intake i think this was later eliminated on later synergys Click to expand... Right mine has just the rail and the MAF plugs
2.0_hippo Well-Known Member May 27, 2011 #10 you have the newer one then arent they just great bits of kit