P38-FYFEY

New Member

• Jun 14, 2011

• #1

Morning all, my 1995 4.6 HSE currently has single drivers side rear exhaust pipe. I would like to upgrade this ( on the cheap lol) to a double rear ( one each side) any pros or cons to this and would the new rear section fit the existing front section.
Regards
Steve

 

C

clarkie

Active Member

• Jun 14, 2011

• #2

start by checkin you have the hangers already welded to the chassis for the other boxes,if so its a straitforward fit the trim on the bottom of the bumper is different as well i think

 

Irishrover

Well-Known Member

• Jun 14, 2011

• #3

This subject has been covered many times. The last time, just over a week ago.
Please do a search to avoid people having to give the same replies time, after time, after time, after time etc., etc.:behindsofa::search::search::search::search:

 

P38-FYFEY

New Member

• Jun 14, 2011

• #4

Cheers Irish...... Did search a few but couldn't find
Regards.

 

treeman

Active Member

• Jun 15, 2011

• #5

According to rave the only difference is from the centre box back ie swap single exit pipe for pipe with t piece and twin exit tails. As clarkie says the bumber will need changing as-well unless you want to cut yours to fit.