kernowsvenski
Well-Known Member
They look good, and expensive!
xDParis64
Active Member
Well I guess that settles it then haha!
Arctic2
Well-Known Member
Hi ADParis64.
That s a excellent price for those hoses, do you have a link for them please, i wonder what the quality is or will be like.
xDParis64
Active Member
Hey!
They only came into stock 30 mins ago very sought after supposedly but I do have a link, https://www.ebay.co.uk/itm/18365215...ar=691120264780&widget_ver=artemis&media=COPY
Have ordered them already! So happy to feedback on quality
xDParis64
Active Member
Got them installed!
Quality? 7/10
Ease? 4/10
General recommendation? They are good. They're not excellent and not "easy" to put on as some of them are thicker tubing than they are wide inside but that is fine, they seem to be damaged quite easily but I have no other silicone hoses to compare them to, but damaged the plastic on the engine was enough to cut the inside diameter of the tube when installing.
When it comes to installing them it was fairly easy, if you know where the hoses go... now having a thermostat to install which I did not before I didn't know where half the hoses went but after some trial and error it was fairly easy however the clamps used were sub-par (I hated them) and were often too big getting in the way of each other, especially those going to the heater core in the dash.
I am yet to run it up to temp but I would strongly recommend getting your own clamps as these ones are really good fitting on the hose, but once they stretch when installing on the engine and what-not they are very tight or wayyyy to loose so using or making your own clamps would be in my recommendation.
Overall though, they look really good, 7.5/10!
Quality? 7/10
Ease? 4/10
General recommendation? They are good. They're not excellent and not "easy" to put on as some of them are thicker tubing than they are wide inside but that is fine, they seem to be damaged quite easily but I have no other silicone hoses to compare them to, but damaged the plastic on the engine was enough to cut the inside diameter of the tube when installing.
When it comes to installing them it was fairly easy, if you know where the hoses go... now having a thermostat to install which I did not before I didn't know where half the hoses went but after some trial and error it was fairly easy however the clamps used were sub-par (I hated them) and were often too big getting in the way of each other, especially those going to the heater core in the dash.
I am yet to run it up to temp but I would strongly recommend getting your own clamps as these ones are really good fitting on the hose, but once they stretch when installing on the engine and what-not they are very tight or wayyyy to loose so using or making your own clamps would be in my recommendation.
Overall though, they look really good, 7.5/10!
