S

steve-o

Active Member

• Nov 13, 2010

• #1

I have realised the rubber seal that fits into the top of my side panel on one side is missing. It is the seal that goes between the side and the roof. Anyone know the part number or availability of such a thing?

I am guessing it is an L shape to fit the back too.

E bay turned up one for the left hand side only and it was £20!!

 

MrJC

Well-Known Member

• Nov 13, 2010

• #2

What Defender have you got? I believe you can fit a new one without taking the roof completely off.... leave the screen/roof bolts in place and work back. Prise roof from rear and prop up with a brush just enough to get at it. I would do both... but a bead of tiger seal or similar should make it good..... do a search online for best price... if in any doubt always ring and confirm its the right seal... 334610 HARD TOP SIDE TO ROOF SEAL RH | shop | www.lrseries.com | L. R. Series seal&page=1

 

foss

New Member

• Nov 13, 2010

• #3

just lift it up & just use tiger seal, probably better than a proper seal anyways

 

S

steve-o

Active Member

• Nov 16, 2010

• #4

Its a 90 and I am going from truck cab to roof and sides.

Thanks for link