Early LR rod operated ones maybe left something to be desired. But the later cable ones are more than good enough. There was a change some time ago that changed designation from parking brake to emergency brake. There was never a Mk II Jag or E type made that would pass the MOT for hand brake efficiency. :D

I always pull up just outside the mot station to tweak the shoe adjuster and back it off when leaving simply to avoid the inevitable drawn out conversation about lever travel :)
 
I always pull up just outside the mot station to tweak the shoe adjuster and back it off when leaving simply to avoid the inevitable drawn out conversation about lever travel :)

Ideally handbrake should be on in three clicks, but it should travel no more than five. If it does it should be a fail even if it passes efficiency test. :D:D
 
Ideally handbrake should be on in three clicks, but it should travel no more than five. If it does it should be a fail even if it passes efficiency test. :D:D

That's no problem on a Series....


So long as you start from a position that will have the drum glowing red after a mile :D
 
That's no problem on a Series....


So long as you start from a position that will have the drum glowing red after a mile :D

Long long time since i worked on a series but pretty basic and simple stuff once you got through the rust. :D:D
 
If you do any serious off roading the std drum brake is a royal pita.
The X eng set up solves this with one simple stroke.
Think of all the times you have wanted your handbrake to hold and its not quite right, no such worries with the disc, of course if you have never had any such issues you dont do any serious off roading even if you think you do.
I should add that many big off road machines have exposed transmission disc brakes with no issues.
In a nutshell the disc brake is very very good.
 

Attachments

  • Screen Shot 2015-11-01 at 15.13.33.png
    Screen Shot 2015-11-01 at 15.13.33.png
    171.4 KB · Views: 66
Ideally handbrake should be on in three clicks, but it should travel no more than five. If it does it should be a fail even if it passes efficiency test. :D:D

That changed quite some time ago, years in fact.
I think the wording is along the lines of is there any reserve travel.
 
Last edited:
So you had not maintained the standard brake properly then? The standard brake in good nick used to hard in emergency mode, will lock the rear wheels sufficiently well to snap an half shaft on dry tarmac.
If you do any serious off roading the std drum brake is a royal pita.
The X eng set up solves this with one simple stroke.
Think of all the times you have wanted your handbrake to hold and its not quite right, no such worries with the disc, of course if you have never had any such issues you dont do any serious off roading even if you think you do.
I should add that many big off road machines have exposed transmission disc brakes with no issues.
In a nutshell the disc brake is very very good.
Your comments have made me feel a bit better after all the hassle and cost of the disc system!!.
 
The disc certainly is not trouble free, then again nothing is, but thats true of so many things that people praise up, then you buy one ask some questions and they reply oh yes they all do that, well you ****s if I knew that in the first place I would not have bought one, happens more on expensive car forums.
I think the x eng guy is bit of a cock as I had a run in with him some time back ref shear strength of m14/16 bolts and he clearly did not know what he was on about, but his brake is good.
He was of the opinion that a rear spare wheel carrier would be just fine with two fixing bolts holding the wheel on rather than the std three!
 

Similar threads