Mongo

Active Member
And before you all start, NO, i don't want Carlos Fandango super wide's ok :D

However, i would be interested in a new set of rims, as the ones on my RR resemble spongebob square pants mate the star fish... Patrick i think his name is.

Tried the bay of E, and it's all a bit silly on there, as most sets of wheels cost more than i paid for me RR in the first place :eek:

Anyone???????
 
I've just put my set of 16" back on for the winter ( I run a set of All Terrains for the Winter). Other than they look better It always makes me wonder why the hell I run a set of 18" for the rest of the year. The ride is so much better with the 16" on.
There are some quite nice looking 16" Discovery 2 and P38 rims out there but I must admit the P38 looks better on the 18".
Choose well sir,

Dave
 
I've just put my set of 16" back on for the winter ( I run a set of All Terrains for the Winter). Other than they look better It always makes me wonder why the hell I run a set of 18" for the rest of the year. The ride is so much better with the 16" on.
There are some quite nice looking 16" Discovery 2 and P38 rims out there but I must admit the P38 looks better on the 18".
Choose well sir,

Dave

Have to agree on the ride with 16's, SO much better ride. Would put some back on mine but it came with 18's.
 
not wanting to put l322 wheels on are you :D:D:D:D:D:D


16inch rims are the way to go i have a set of 4 p38/d2 rims for sale if your interested
 
Last edited:
not wanting to put l322 wheels on are you :D:D:D:D:D:D


16inch rims are the way to go i have a set of 4 p38/d2 rims for sale if your interested

I didn't think L322 wheels would fit so i didn't ask.... wouldn't know where to start with cutting and welding wheel rims dear chap.

Out of interest, i found this item for sale on the bay of E...

Box of 30 Packs Wrigleys Extra Peppermint Sugar Free Chewing Gum | eBay


it's located in Doncaster... oop north, so i'm wondering if i can officially call this item E-bay gum :hysterically_laughi:hysterically_laughi:hysterically_laughi:hysterically_laughi:hysterically_laughi:hysterically_laughi:hysterically_laughi
 
I have a stock set of 18,s with rubber
If your interested

I've got a set of 18's already... so i'm thinking about the set of 16's.

Only downside i can think of is that the wheel arches will look mahoosive :eek:

Where abouts are you located?

what sort of money were you looking for?

And what do yours look like?
 
Theres a cheep set of hurricanes on ebay at the moment will need a repaint but if you ok with a rattle can could be made ok
http://pages.ebay.com/link/?nav=item.view&id=281220705258
Thats what I did and I got mine for £30 something though then repainted them to the holland & holland colours theres a thread on it if you want me to link it

They're about 162 quid at the moment... plus they look like they've picked up a few dents
 
Yea but there a easy diy job one of mine was peeling and curbed to hell but abit of tlc and looks mint now
 
Last edited:
Running a set of disco D4 19" rims on mine,have been for over a year now and every thing is good,I must admit the old 16" were a bit softer ride but not a massive difference,fitting the 19"s showed a weak link with the steering damper replaced it and happy days again
 
Yea I went up from 16s to the above 18s and she started to wonder/tramline abit at the time i thought it was just because i hadent found the "sweet spot" for the tire pressure's turned out was a failing track rod end thats wasent evedent on the 16s
 
I've got a set of 18's already... so i'm thinking about the set of 16's.

Only downside i can think of is that the wheel arches will look mahoosive :eek:

Where abouts are you located?

what sort of money were you looking for?

And what do yours look like?

16" wheels, 18" wheels, 19" wheels, providing they have the correct tyres fitted are all the same O/D so will all fill the wheel arch equally. I have 19s on mine and they just look more proportionate than the 16s but are no larger in rolling radius and fill the aches exactly the same. L322 wheels will fit but you need new nuts and spigots.
 
very nice mate, did they take a lot to get to that standard of work, the masking must have been a pain to do
Was time consuming ill say that lol
I did the sharp lines down the spokes by hand and brush (I used to be a decorator so have a steady hand) then masked the rest out and sprayed it! finishing with 5 coats of clear probably about 10 hours work over 3 weekends (allowing plenty of time for Paint to completely dry between coats)
 

Similar threads