Padda.116

Member

• Yesterday at 20:33

• #1

Hi all,

I need to renew the brake pedal spring as it’s not pulling the pedal back into its resting position anymore. I have attached a picture of the clutch pedal and the brake pedal could someone please give me a link for both of them OEM please.

A quick side note. Is this the correct front lower grill valance for a 1963 2A (bit of a mongral anyway) and I know the 2 bolt holes have snapped off how did people repair that and where does it bolt on the chassis?

Thanks!!

 

Attachments

• 
  IMG_5560.jpeg

  389.6 KB · Views: 24
• 
  IMG_5561.jpeg

  276.1 KB · Views: 22
• 
  IMG_5562.jpeg

  178.9 KB · Views: 22
• 
  IMG_5563.jpeg

  291.3 KB · Views: 19

Gun7354

Well-Known Member

• Yesterday at 21:09

• #2

Try John Craddock's matey

https://www.johncraddockltd.co.uk/series/series-2/parts/brakes/

Rich

 

tottot

Well-Known Member

• Yesterday at 21:32

• #3

Check the pedal pivot points are free moving. Not the correct valance, 63 would be flat topped.

 

Rangieman123

Well-Known Member

• Yesterday at 21:45

• #4

Your spring doesn't look to be the worst. I'd second the idea of properly lubricating the pedal pivots.
Your valence panel is off a 2A. I've removed mine, as it let's me stand between the bumper and grille when spannering.

 

tottot

Well-Known Member

• Today at 11:06

• #5

Your valance is from later 2a post 66

 

W

Wildefalcon

Well-Known Member

• Today at 15:42

• #6

Budget for a new master cylinder.